[PATCH v3] ARM: mxs: Enable usbphy1 and usb1 on apx4devkit DTS

Aapo Vienamo aapo.vienamo at iki.fi
Sun Jan 12 06:00:39 PST 2020


Enable the USB host port on the APx4 development board.

Signed-off-by: Aapo Vienamo <aapo.vienamo at iki.fi>
---
 arch/arm/boot/dts/imx28-apx4devkit.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 3a184d13887b..c5acc19c982d 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -183,10 +183,20 @@ auart2: serial at 8006e000 {
 				pinctrl-0 = <&auart2_2pins_a>;
 				status = "okay";
 			};
+
+			usbphy1: usbphy at 8007e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&usb1_pins_a>;
+				status = "okay";
+			};
 		};
 	};
 
 	ahb at 80080000 {
+		usb1: usb at 80090000 {
+		      status = "okay";
+		};
+
 		mac0: ethernet at 800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
-- 
2.24.1




More information about the linux-arm-kernel mailing list