[PATCH 6/9] mmc: mmci: sdmmc: add execute tuning with delay block

Ludovic Barre ludovic.barre at st.com
Fri Jan 10 05:48:20 PST 2020


The hardware delay block is used to align the sampling clock on
the data received by SDMMC. It is mandatory for SDMMC to
support the SDR104 mode. The delay block is used to generate
an output clock which is dephased from the input clock.
The phase of the output clock must be programmed by the execute
tuning interface.

Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
---
 drivers/mmc/host/mmci_stm32_sdmmc.c | 147 ++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index df08f6662431..10059fa19f4a 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -3,10 +3,13 @@
  * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
  * Author: Ludovic.barre at st.com for STMicroelectronics.
  */
+#include <linux/bitfield.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
+#include <linux/of_address.h>
 #include <linux/reset.h>
 #include <linux/scatterlist.h>
 #include "mmci.h"
@@ -14,6 +17,20 @@
 #define SDMMC_LLI_BUF_LEN	PAGE_SIZE
 #define SDMMC_IDMA_BURST	BIT(MMCI_STM32_IDMABNDT_SHIFT)
 
+#define DLYB_CR			0x0
+#define DLYB_CR_DEN		BIT(0)
+#define DLYB_CR_SEN		BIT(1)
+
+#define DLYB_CFGR		0x4
+#define DLYB_CFGR_SEL_MASK	GENMASK(3, 0)
+#define DLYB_CFGR_UNIT_MASK	GENMASK(14, 8)
+#define DLYB_CFGR_LNG_MASK	GENMASK(27, 16)
+#define DLYB_CFGR_LNGF		BIT(31)
+
+#define DLYB_NB_DELAY		11
+#define DLYB_CFGR_SEL_MAX	(DLYB_NB_DELAY + 1)
+#define DLYB_CFGR_UNIT_MAX	127
+
 struct sdmmc_lli_desc {
 	u32 idmalar;
 	u32 idmabase;
@@ -25,6 +42,12 @@ struct sdmmc_idma {
 	void *sg_cpu;
 };
 
+struct sdmmc_dlyb {
+	void __iomem *base;
+	u32 unit;
+	u32 max;
+};
+
 static int sdmmc_idma_validate_data(struct mmci_host *host,
 				    struct mmc_data *data)
 {
@@ -226,12 +249,24 @@ static void mmci_sdmmc_set_clkreg(struct mmci_host *host, unsigned int desired)
 	mmci_write_clkreg(host, clk);
 }
 
+static void sdmmc_dlyb_input_ck(struct sdmmc_dlyb *dlyb)
+{
+	if (!dlyb || !dlyb->base)
+		return;
+
+	/* Output clock = Input clock */
+	writel_relaxed(0, dlyb->base + DLYB_CR);
+}
+
 static void mmci_sdmmc_set_pwrreg(struct mmci_host *host, unsigned int pwr)
 {
 	struct mmc_ios ios = host->mmc->ios;
+	struct sdmmc_dlyb *dlyb = host->variant_priv;
 
 	pwr = host->pwr_reg_add;
 
+	sdmmc_dlyb_input_ck(dlyb);
+
 	if (ios.power_mode == MMC_POWER_OFF) {
 		/* Only a reset could power-off sdmmc */
 		reset_control_assert(host->rst);
@@ -323,6 +358,102 @@ static bool sdmmc_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
 	return true;
 }
 
+static void sdmmc_dlyb_set_cfgr(struct sdmmc_dlyb *dlyb,
+				int unit, int phase, bool sampler)
+{
+	u32 cfgr;
+
+	writel_relaxed(DLYB_CR_SEN | DLYB_CR_DEN, dlyb->base + DLYB_CR);
+
+	cfgr = FIELD_PREP(DLYB_CFGR_UNIT_MASK, unit) |
+	       FIELD_PREP(DLYB_CFGR_SEL_MASK, phase);
+	writel_relaxed(cfgr, dlyb->base + DLYB_CFGR);
+
+	if (!sampler)
+		writel_relaxed(DLYB_CR_DEN, dlyb->base + DLYB_CR);
+}
+
+static int sdmmc_dlyb_lng_tuning(struct mmci_host *host)
+{
+	struct sdmmc_dlyb *dlyb = host->variant_priv;
+	u32 cfgr;
+	int i, lng, ret;
+
+	for (i = 0; i <= DLYB_CFGR_UNIT_MAX; i++) {
+		sdmmc_dlyb_set_cfgr(dlyb, i, DLYB_CFGR_SEL_MAX, true);
+
+		ret = readl_relaxed_poll_timeout(dlyb->base + DLYB_CFGR, cfgr,
+						 (cfgr & DLYB_CFGR_LNGF),
+						 1, 1000);
+		if (ret) {
+			dev_warn(mmc_dev(host->mmc),
+				 "delay line cfg timeout unit:%d cfgr:%d\n",
+				 i, cfgr);
+			continue;
+		}
+
+		lng = FIELD_GET(DLYB_CFGR_LNG_MASK, cfgr);
+		if (lng < BIT(DLYB_NB_DELAY) && lng > 0)
+			break;
+	}
+
+	if (i > DLYB_CFGR_UNIT_MAX)
+		return -EINVAL;
+
+	dlyb->unit = i;
+	dlyb->max = __fls(lng);
+
+	return 0;
+}
+
+static int sdmmc_dlyb_phase_tuning(struct mmci_host *host, u32 opcode)
+{
+	struct sdmmc_dlyb *dlyb = host->variant_priv;
+	int cur_len = 0, max_len = 0, end_of_len = 0;
+	int phase;
+
+	for (phase = 0; phase <= dlyb->max; phase++) {
+		sdmmc_dlyb_set_cfgr(dlyb, dlyb->unit, phase, false);
+
+		if (mmc_send_tuning(host->mmc, opcode, NULL)) {
+			cur_len = 0;
+		} else {
+			cur_len++;
+			if (cur_len > max_len) {
+				max_len = cur_len;
+				end_of_len = phase;
+			}
+		}
+	}
+
+	if (!max_len) {
+		dev_err(mmc_dev(host->mmc), "no tuning point found\n");
+		return -EINVAL;
+	}
+
+	phase = end_of_len - max_len / 2;
+	sdmmc_dlyb_set_cfgr(dlyb, dlyb->unit, phase, false);
+
+	dev_dbg(mmc_dev(host->mmc), "unit:%d max_dly:%d phase:%d\n",
+		dlyb->unit, dlyb->max, phase);
+
+	return 0;
+}
+
+static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct mmci_host *host = mmc_priv(mmc);
+	struct sdmmc_dlyb *dlyb = host->variant_priv;
+
+	if (!dlyb || !dlyb->base)
+		return -EINVAL;
+
+	if (sdmmc_dlyb_lng_tuning(host))
+		return -EINVAL;
+
+	return sdmmc_dlyb_phase_tuning(host, opcode);
+}
+
 static struct mmci_host_ops sdmmc_variant_ops = {
 	.validate_data = sdmmc_idma_validate_data,
 	.prep_data = sdmmc_idma_prep_data,
@@ -338,5 +469,21 @@ static struct mmci_host_ops sdmmc_variant_ops = {
 
 void sdmmc_variant_init(struct mmci_host *host)
 {
+	struct device_node *np = host->mmc->parent->of_node;
+	void __iomem *base_dlyb;
+	struct sdmmc_dlyb *dlyb;
+
 	host->ops = &sdmmc_variant_ops;
+
+	base_dlyb = devm_of_iomap(mmc_dev(host->mmc), np, 1, NULL);
+	if (IS_ERR(base_dlyb))
+		return;
+
+	dlyb = devm_kzalloc(mmc_dev(host->mmc), sizeof(*dlyb), GFP_KERNEL);
+	if (!dlyb)
+		return;
+
+	dlyb->base = base_dlyb;
+	host->variant_priv = dlyb;
+	host->mmc_ops->execute_tuning = sdmmc_execute_tuning;
 }
-- 
2.17.1




More information about the linux-arm-kernel mailing list