[PATCH AUTOSEL 4.19 102/177] nvmem: imx-ocotp: reset error status on probe

Greg Kroah-Hartman gregkh at linuxfoundation.org
Thu Jan 9 23:13:28 PST 2020


On Tue, Jan 07, 2020 at 08:29:12PM +0100, Sébastien Szymanski wrote:
> Hi Lucas,
> 
> > On 7 Jan 2020, at 18:53, Lucas Stach <l.stach at pengutronix.de> wrote:
> > 
> > Hi Sébastien,
> > 
> > On Di, 2020-01-07 at 15:50 +0100, Sébastien Szymanski wrote:
> >> On 12/10/19 10:31 PM, Sasha Levin wrote:
> >>> From: Lucas Stach <l.stach at pengutronix.de>
> >>> 
> >>> [ Upstream commit c33c585f1b3a99d53920bdac614aca461d8db06f ]
> >>> 
> >>> If software running before the OCOTP driver is loaded left the
> >>> controller with the error status pending, the driver will never
> >>> be able to complete the read timing setup. Reset the error status
> >>> on probe to make sure the controller is in usable state.
> >>> 
> >>> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> >>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> >>> Link: https://lore.kernel.org/r/20191029114240.14905-6-srinivas.kandagatla@linaro.org
> >>> Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> >>> Signed-off-by: Sasha Levin <sashal at kernel.org>
> >>> ---
> >>> drivers/nvmem/imx-ocotp.c | 4 ++++
> >>> 1 file changed, 4 insertions(+)
> >>> 
> >>> diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
> >>> index afb429a417fe0..926d9cc080cf4 100644
> >>> --- a/drivers/nvmem/imx-ocotp.c
> >>> +++ b/drivers/nvmem/imx-ocotp.c
> >>> @@ -466,6 +466,10 @@ static int imx_ocotp_probe(struct platform_device *pdev)
> >>> 	if (IS_ERR(priv->clk))
> >>> 		return PTR_ERR(priv->clk);
> >>> 
> >>> +	clk_prepare_enable(priv->clk);
> >>> +	imx_ocotp_clr_err_if_set(priv->base);
> >>> +	clk_disable_unprepare(priv->clk);
> >>> +
> >>> 	priv->params = of_device_get_match_data(&pdev->dev);
> >>> 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
> >>> 	imx_ocotp_nvmem_config.dev = dev;
> >>> 
> >> 
> >> Hi,
> >> 
> >> This patch makes kernel 4.19.{92,93} hang at boot on my i.MX6ULL based
> >> board. It hanks at
> >> 
> >> [    3.730078] cpu cpu0: Linked as a consumer to regulator.2
> >> [    3.737760] cpu cpu0: Linked as a consumer to regulator.3
> >> 
> >> Full boot log is here: https://pastebin.com/TS8EFxkr
> >> 
> >> The config is imx_v6_v7_defconfig.
> >> 
> >> Reverting it makes the kernels boot again.
> > 
> > Can you check if it actually hangs in imx_ocotp_clr_err_if_set(), or if
> > the clk_disable_unprepare() is the culprit?
> > 
> > If the clock disable hangs the system there is a missing clock
> > reference somewhere else that we need to track down.
> 
> Yes, the system hangs in the imx6q-cpufreq driver, here:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/cpufreq/imx6q-cpufreq.c?h=v4.19.93#n322
> 
> Kernel 5.4.8 works thanks to commits:
> 
> 2733fb0d0699 (“cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull”)
> 92f0eb08c66a ("ARM: dts: imx6ul: use nvmem-cells for cpu speed grading”)

I've now queued both of these up for 4.19, hopefully that should resolve
this issue, thanks!

greg k-h



More information about the linux-arm-kernel mailing list