[PATCH v2 0/4] Add support for Thor96 board

Manivannan Sadhasivam manivannan.sadhasivam at linaro.org
Wed Jan 8 19:33:42 PST 2020


Hi Shawn,

On Wed, Oct 30, 2019 at 02:31:20PM +0530, Manivannan Sadhasivam wrote:
> Hello,
> 
> This patchset adds support for Thor96 board from Einfochips. This board is
> one of the 96Boards Consumer Edition platform powered by the NXP i.MX8MQ
> SoC.
> 
> Following are the features supported currently:
> 
> 1. uSD
> 2. WiFi/BT
> 3. Ethernet
> 4. EEPROM (M24256)
> 5. NOR Flash (W25Q256JW)
> 6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion
> 
> More information about this board can be found in Arrow website:
> https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools
> 
> Link to 96Boards CE Specification: https://linaro.co/ce-specification
> 
> Expecting patch 1 to go through LED/Rob's tree, 4 through MTD tree
> and 2,3 through Freescale tree.
> 

Any update here? Patch 4 is already merged.

Thanks,
Mani

> Thanks,
> Mani
> 
> Changes in v2:
> 
> * Added patch for documenting commonly used LED triggers
> * Added Reviewed-by tags for bindings patch
> * Changed, fsl,uart-has-rtscts to uart-has-rtscts in dts
> * Modified the commit message of MTD patch
> 
> Manivannan Sadhasivam (4):
>   dt-bindings: leds: Document commonly used LED triggers
>   dt-bindings: arm: Add devicetree binding for Thor96 Board
>   arm64: dts: freescale: Add devicetree support for Thor96 board
>   mtd: spi-nor: Add support for w25q256jw
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  .../devicetree/bindings/leds/common.txt       |  17 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8mq-thor96.dts      | 581 ++++++++++++++++++
>  drivers/mtd/spi-nor/spi-nor.c                 |   2 +
>  5 files changed, 602 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
> 
> -- 
> 2.17.1
> 



More information about the linux-arm-kernel mailing list