[PATCH 0/5] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

Roger Quadros rogerq at ti.com
Wed Jan 8 03:18:25 PST 2020


Hi Tero,

This series adds SERDES PHY support. The relevant PHY driver
and bindings are already Acked and in phy/next [1]

It also adds Super-Speed support to the Type-C port on the EVM.
The USB Type-C related support is also Acked and in phy/next [2]

Please queue this for v5.6 if no objections. Thanks.

[1] https://patchwork.kernel.org/cover/11293671/
[2] https://lkml.org/lkml/2020/1/6/303

cheers,
-roger

Kishon Vijay Abraham I (2):
  arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
  arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select
    SERDES lane mux

Roger Quadros (3):
  arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
  arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
  arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
    line

 .../dts/ti/k3-j721e-common-proc-board.dts     |  33 ++-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 274 ++++++++++++++++++
 include/dt-bindings/mux/mux-j721e-wiz.h       |  53 ++++
 3 files changed, 358 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki




More information about the linux-arm-kernel mailing list