[PATCH v2 2/3] ARM: dts: imx6: phycore-som: fix emmc supply

Marco Felsch m.felsch at pengutronix.de
Wed Jan 8 02:10:56 PST 2020


Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong.
On a default module VCCQ and VCC are powered by the 3.3V power rail and
the user can optional connect the VCCQ to the pmic 1.8V emmc power rail
using a solder jumper.

Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
v2:
- remove all supplies references because per default the emmc is
  powered by the 3.3V power rail.
- adapt commit message

 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index f23eef1e54e0..31fa37d2fe47 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -183,7 +183,6 @@
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
 	non-removable;
-	vmmc-supply = <&vdd_emmc_1p8>;
 	status = "disabled";
 };
 
-- 
2.20.1




More information about the linux-arm-kernel mailing list