[PATCH v2 05/19] iommu/mediatek: Put inv_sel_reg in the plat_data for preparing add 0x2c support in mt6779

Chao Hao chao.hao at mediatek.com
Sun Jan 5 02:45:09 PST 2020


For mt6779, MMU_INVLDT_SEL register's offset is changed from 0x38 to 0x2c,
so we can put inv_sel_reg in the plat_data to use it.

Signed-off-by: Chao Hao <chao.hao at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 8 ++++++--
 drivers/iommu/mtk_iommu.h | 1 +
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index bffd417f4442..b61785a87764 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -37,6 +37,7 @@
 #define REG_MMU_INVLD_START_A			0x024
 #define REG_MMU_INVLD_END_A			0x028
 
+#define REG_MMU_INV_SEL_MT6779			0x02c
 #define REG_MMU_INV_SEL				0x038
 #define F_INVLD_EN0				BIT(0)
 #define F_INVLD_EN1				BIT(1)
@@ -165,7 +166,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
 
 	for_each_m4u(data) {
 		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
-			       data->base + REG_MMU_INV_SEL);
+			       data->base + data->plat_data->inv_sel_reg);
 		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
 		wmb(); /* Make sure the tlb flush all done */
 	}
@@ -182,7 +183,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
 	for_each_m4u(data) {
 		spin_lock_irqsave(&data->tlb_lock, flags);
 		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
-			       data->base + REG_MMU_INV_SEL);
+			       data->base + data->plat_data->inv_sel_reg);
 
 		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
 		writel_relaxed(iova + size - 1,
@@ -783,6 +784,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
 	.has_bclk     = true,
 	.has_vld_pa_rng   = true,
 	.larbid_remap[0] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.inv_sel_reg = REG_MMU_INV_SEL,
 };
 
 static const struct mtk_iommu_plat_data mt8173_data = {
@@ -791,12 +793,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
 	.has_bclk     = true,
 	.reset_axi    = true,
 	.larbid_remap[0] = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
+	.inv_sel_reg = REG_MMU_INV_SEL,
 };
 
 static const struct mtk_iommu_plat_data mt8183_data = {
 	.m4u_plat     = M4U_MT8183,
 	.reset_axi    = true,
 	.larbid_remap[0] = {0, 4, 5, 6, 7, 2, 3, 1},
+	.inv_sel_reg = REG_MMU_INV_SEL,
 };
 
 static const struct of_device_id mtk_iommu_of_ids[] = {
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index c585811a957c..ec3011a50728 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
 	bool                has_vld_pa_rng;
 	bool                reset_axi;
 	u32                 m4u1_mask;
+	u32                 inv_sel_reg;
 	unsigned char       larbid_remap[2][MTK_LARB_NR_MAX];
 };
 
-- 
2.18.0


More information about the linux-arm-kernel mailing list