[PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board

Heiko Stuebner heiko at sntech.de
Sat Jan 4 13:19:34 PST 2020


Hi Markus,

I've only gotten patches 3+5 of this series (vendor-prefix+dts patch), so
maybe you could teach your git-send-email to include all patches to all
recipients.

Am Samstag, 4. Januar 2020, 16:32:44 CET schrieb Markus Reichl:
> On rk3399-roc-pc board a voltage regulator MP8859 from Monolithic Power Systems
> is used to supply the 12V power line. This delivers 5V as a default value after
> boot. The voltage is controllable via I2C.
> Add a basic driver to set and get the voltage of the MP8859 and add a matching
> node with fixed 12V in the DT of the board. 
> 
> Markus Reichl (5):
>   regulator: mp8859: add driver
>   regulator: mp8859: add config option and build entry

I think these two should only need one patch together.

Heiko

>   dt-bindings: add vendor Monolithic Power Systems
>   dt-bindings: regulator: add MPS mp8859 voltage regulator
>   arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
> 
>  .../devicetree/bindings/regulator/mp8859.txt  |  22 +++
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      |  32 ++--
>  drivers/regulator/Kconfig                     |  11 ++
>  drivers/regulator/Makefile                    |   1 +
>  drivers/regulator/mp8859.c                    | 156 ++++++++++++++++++
>  6 files changed, 210 insertions(+), 14 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mp8859.txt
>  create mode 100644 drivers/regulator/mp8859.c
> 
> 







More information about the linux-arm-kernel mailing list