[PATCH] dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema

Chen-Yu Tsai wens at kernel.org
Fri Jan 3 02:51:38 PST 2020


On Thu, Jan 2, 2020 at 11:26 PM Maxime Ripard <maxime at cerno.tech> wrote:
>
> On Thu, Jan 02, 2020 at 08:31:40PM +0800, Chen-Yu Tsai wrote:
> > On Thu, Jan 2, 2020 at 8:02 PM Maxime Ripard <maxime at cerno.tech> wrote:
> > >
> > > Hi,
> > >
> > > On Fri, Dec 20, 2019 at 04:10:03PM +0800, Chen-Yu Tsai wrote:
> > > > On Fri, Dec 20, 2019 at 4:03 PM Maxime Ripard <maxime at cerno.tech> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > On Thu, Dec 19, 2019 at 11:24:52PM +0800, Chen-Yu Tsai wrote:
> > > > > > On Thu, Dec 19, 2019 at 4:43 PM Maxime Ripard <maxime at cerno.tech> wrote:
> > > > > > >
> > > > > > > The Allwinner A80 SoCs have a USB PHY controller that is used by Linux,
> > > > > > > with a matching Device Tree binding.
> > > > > > >
> > > > > > > Now that we have the DT validation in place, let's convert the device tree
> > > > > > > bindings for that controller over to a YAML schemas.
> > > > > > >
> > > > > > > Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> > > > > > > ---
> > > > > > >  .../phy/allwinner,sun9i-a80-usb-phy.yaml      | 135 ++++++++++++++++++
> > > > > > >  .../devicetree/bindings/phy/sun9i-usb-phy.txt |  37 -----
> > > > > > >  2 files changed, 135 insertions(+), 37 deletions(-)
> > > > > > >  create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
> > > > > > >  delete mode 100644 Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
> > > > > > >
> > > > > > > diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..ded7d6f0a119
> > > > > > > --- /dev/null
> > > > > > > +++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
> > > > > > > @@ -0,0 +1,135 @@
> > > > > > > +# SPDX-License-Identifier: GPL-2.0
> > > > > > > +%YAML 1.2
> > > > > > > +---
> > > > > > > +$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
> > > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > > > +
> > > > > > > +title: Allwinner A80 USB PHY Device Tree Bindings
> > > > > > > +
> > > > > > > +maintainers:
> > > > > > > +  - Chen-Yu Tsai <wens at csie.org>
> > > > > > > +  - Maxime Ripard <mripard at kernel.org>
> > > > > > > +
> > > > > > > +properties:
> > > > > > > +  "#phy-cells":
> > > > > > > +    const: 0
> > > > > > > +
> > > > > > > +  compatible:
> > > > > > > +    const: allwinner,sun9i-a80-usb-phy
> > > > > > > +
> > > > > > > +  reg:
> > > > > > > +    maxItems: 1
> > > > > > > +
> > > > > > > +  clocks:
> > > > > > > +    anyOf:
> > > > > > > +      - description: Main PHY Clock
> > > > > > > +
> > > > > > > +      - items:
> > > > > > > +          - description: Main PHY clock
> > > > > > > +          - description: HSIC 12MHz clock
> > > > > > > +          - description: HSIC 480MHz clock
> > > > > > > +
> > > > > > > +  clock-names:
> > > > > > > +    oneOf:
> > > > > > > +      - const: phy
> > > > > > > +
> > > > > > > +      - items:
> > > > > > > +          - const: phy
> > > > > > > +          - const: hsic_12M
> > > > > > > +          - const: hsic_480M
> > > > > > > +
> > > > > > > +  resets:
> > > > > > > +    anyOf:
> > > > > > > +      - description: Normal USB PHY reset
> > > > > > > +
> > > > > > > +      - items:
> > > > > > > +          - description: Normal USB PHY reset
> > > > > > > +          - description: HSIC Reset
> > > > > > > +
> > > > > > > +  reset-names:
> > > > > > > +    oneOf:
> > > > > > > +      - const: phy
> > > > > > > +
> > > > > > > +      - items:
> > > > > > > +          - const: phy
> > > > > > > +          - const: hsic
> > > > > > > +
> > > > > > > +  phy_type:
> > > > > > > +    const: hsic
> > > > > > > +    description:
> > > > > > > +      When absent, the PHY type will be assumed to be normal USB.
> > > > > > > +
> > > > > > > +  phy-supply:
> > > > > > > +    description:
> > > > > > > +      Regulator that powers VBUS
> > > > > > > +
> > > > > > > +required:
> > > > > > > +  - "#phy-cells"
> > > > > > > +  - compatible
> > > > > > > +  - reg
> > > > > > > +  - clocks
> > > > > > > +  - clock-names
> > > > > > > +  - resets
> > > > > > > +  - reset-names
> > > > > > > +
> > > > > > > +additionalProperties: false
> > > > > > > +
> > > > > > > +if:
> > > > > > > +  properties:
> > > > > > > +    phy_type:
> > > > > > > +      const: hsic
> > > > > > > +
> > > > > > > +  required:
> > > > > > > +    - phy_type
> > > > > > > +
> > > > > > > +then:
> > > > > > > +  properties:
> > > > > > > +    clocks:
> > > > > > > +      maxItems: 3
> > > > > > > +
> > > > > > > +    clock-names:
> > > > > > > +      maxItems: 3
> > > > > > > +
> > > > > > > +    resets:
> > > > > > > +      maxItems: 2
> > > > > > > +
> > > > > > > +    reset-names:
> > > > > > > +      maxItems: 2
> > > > > >
> > > > > > So this is slightly incorrect. If phy_type == "hsic", then the
> > > > > > "phy" clock and reset should not be needed. I say should because
> > > > > > no boards actually came with HSIC implemented. The A80 Optimus
> > > > > > board had the HSIC lines on one of the GPIO headers, but I never
> > > > > > had any HSIC chips lol.
> > > > >
> > > > > This isn't what the previous binding was saying though :/
> > > >
> > > > From the original binding:
> > > >
> > > > - clock-names : depending on the "phy_type" property,
> > > >   * "phy" for normal USB
> > > >   * "hsic_480M", "hsic_12M" for HSIC
> > > > - resets : a list of phandle + reset specifier pairs
> > > > - reset-names : depending on the "phy_type" property,
> > > >   * "phy" for normal USB
> > > >   * "hsic" for HSIC
> > > >
> > > > It is recommended to list all clocks and resets available.
> > > > The driver will only use those matching the phy_type.
> > >
> > > I'm not quite sure how we want to fix this then, or even what there's
> > > to fix.
> > >
> > > The previous binding is saying that we need either phy or hsic, and
> > > that we should ideally set both. The DT are following that
> > > recommendation, and we have either one item for the clocks (phy), or
> > > three (phy + 2 HSIC clocks). resets is in a similar situation.
> > >
> > > The binding allows to have either one or three, and enforce that in
> > > HSIC we have three (but leaves the option open to have either 1 or 3
> > > in the normal phy type).
> > >
> > > As far as I can see, we cover what the binding was saying. Am I
> > > missing something?
> >
> > I guess you're right. Lets just keep why you've done already.
> > Sorry for the noise.
>
> Is that a Reviewed-by ? :)

Reviewed-by: Chen-Yu Tsai <wens at csie.org>

:)



More information about the linux-arm-kernel mailing list