[PATCH v2 2/2] reset: Add Broadcom STB RESCAL reset controller

Philipp Zabel p.zabel at pengutronix.de
Fri Jan 3 01:27:26 PST 2020


Hi Florian,

just a few small nitpicks:

On Thu, 2020-01-02 at 15:14 -0800, Florian Fainelli wrote:
> From: Jim Quinlan <jim2101024 at gmail.com>
> 
> On BCM7216 there is a special purpose reset controller named RESCAL
> (reset calibration) which is necessary for SATA and PCIe0/1 to operate
> correctly. This commit adds support for such a reset controller to be
> available.
> 
> Signed-off-by: Jim Quinlan <im2101024 at gmail.com>
> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
> ---
>  drivers/reset/Kconfig                |   7 ++
>  drivers/reset/Makefile               |   1 +
>  drivers/reset/reset-brcmstb-rescal.c | 110 +++++++++++++++++++++++++++
>  3 files changed, 118 insertions(+)
>  create mode 100644 drivers/reset/reset-brcmstb-rescal.c
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 12f5c897788d..b7cc0a2049d9 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -49,6 +49,13 @@ config RESET_BRCMSTB
>  	  This enables the reset controller driver for Broadcom STB SoCs using
>  	  a SUN_TOP_CTRL_SW_INIT style controller.
>  
> +config RESET_BRCMSTB_RESCAL
> +	bool "Broadcom STB RESCAL reset controller"
> +	default ARCH_BRCMSTB || COMPILE_TEST
> +	help
> +	  This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
> +	  BCM7216.
> +
>  config RESET_HSDK
>  	bool "Synopsys HSDK Reset Driver"
>  	depends on HAS_IOMEM
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 00767c03f5f2..1e4291185c52 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
>  obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o
>  obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
>  obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o
> +obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o
>  obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
>  obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
>  obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
> diff --git a/drivers/reset/reset-brcmstb-rescal.c b/drivers/reset/reset-brcmstb-rescal.c
> new file mode 100644
> index 000000000000..e1c038e62855
> --- /dev/null
> +++ b/drivers/reset/reset-brcmstb-rescal.c
> @@ -0,0 +1,110 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (C) 2018-2020 Broadcom */
> +
> +#include <linux/device.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +
> +#define BRCM_RESCAL_START	0x0
> +#define  BRCM_RESCAL_START_BIT	BIT(0)
> +#define BRCM_RESCAL_CTRL	0x4
> +#define BRCM_RESCAL_STATUS	0x8
> +#define  BRCM_RESCAL_STATUS_BIT	BIT(0)
> +
> +struct brcm_rescal_reset {
> +	void __iomem	*base;

You could replace the tab before *base with a space for consistency.

> +	struct device *dev;
> +	struct reset_controller_dev rcdev;
> +};
> +
> +static int brcm_rescal_reset_set(struct reset_controller_dev *rcdev,
> +				 unsigned long id)
> +{
> +	struct brcm_rescal_reset *data =
> +		container_of(rcdev, struct brcm_rescal_reset, rcdev);
> +	void __iomem *base = data->base;
> +	u32 reg;
> +	int ret;
> +
> +	reg = readl(base + BRCM_RESCAL_START);
> +	writel(reg | BRCM_RESCAL_START_BIT, base + BRCM_RESCAL_START);
> +	reg = readl(base + BRCM_RESCAL_START);
> +	if (!(reg & BRCM_RESCAL_START_BIT)) {
> +		dev_err(data->dev, "failed to start SATA/PCIe rescal\n");
> +		return -EIO;
> +	}
> +
> +	ret = readl_poll_timeout(base + BRCM_RESCAL_STATUS, reg,
> +				 !(reg & BRCM_RESCAL_STATUS_BIT), 100, 1000);
> +	if (ret) {
> +		dev_err(data->dev, "time out on SATA/PCIe rescal\n");
> +		return -ETIMEDOUT;

Just return ret here, readl_poll_timeout() already returns -ETIMEDOUT.

> +	}
> +
> +	reg = readl(base + BRCM_RESCAL_START);
> +	writel(reg & ~BRCM_RESCAL_START_BIT, base + BRCM_RESCAL_START);
> +	(void)readl(base + BRCM_RESCAL_START);

Is this final read actually necessary (if so, why)?

> +
> +	dev_dbg(data->dev, "SATA/PCIe rescal success\n");
> +
> +	return 0;
> +}
> +
> +static int brcm_rescal_reset_xlate(struct reset_controller_dev *rcdev,
> +				   const struct of_phandle_args *reset_spec)
> +{
> +	/* This is needed if #reset-cells == 0. */
> +	return 0;
> +}
> +
> +static const struct reset_control_ops brcm_rescal_reset_ops = {
> +	.reset = brcm_rescal_reset_set,
> +};
> +
> +static int brcm_rescal_reset_probe(struct platform_device *pdev)
> +{
> +	struct brcm_rescal_reset *data;
> +	struct resource *res;
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	data->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(data->base))
> +		return PTR_ERR(data->base);
> +
> +	platform_set_drvdata(pdev, data);

This can be dropped.

regards
Philipp




More information about the linux-arm-kernel mailing list