[RFC PATCH 2/2] ACPI/IORT: Workaround for IORT ID count "minus one" issue

Shameerali Kolothum Thodi shameerali.kolothum.thodi at huawei.com
Thu Jan 2 02:20:37 PST 2020


Hi Hanjun,

> -----Original Message-----
> From: Linuxarm [mailto:linuxarm-bounces at huawei.com] On Behalf Of Hanjun
> Guo
> Sent: 23 December 2019 09:23
> To: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>; Sudeep Holla
> <sudeep.holla at arm.com>; Rafael J. Wysocki <rafael at kernel.org>; Pankaj
> Bansal <pankaj.bansal at nxp.com>; Erik Schmauss <erik.schmauss at intel.com>
> Cc: linux-acpi at vger.kernel.org; Linuxarm <linuxarm at huawei.com>;
> linux-arm-kernel at lists.infradead.org
> Subject: [RFC PATCH 2/2] ACPI/IORT: Workaround for IORT ID count "minus
> one" issue
> 
> The IORT spec [0] says Number of IDs = The number of IDs in the range minus
> one, it is confusing but it was written down in the first version of the
> IORT spec. But the IORT ID mapping function iort_id_map() did something
> wrong from the start, which bails out if:
> 
> the request ID >= the input base + number of IDs
> 
> This is wrong because it ignored the "minus one", and breaks some valid
> usecases such as ID mapping to contain single device mapping without
> single mapping flag set.
> 
> Pankaj Bansal proposed a solution to fix the issue [1], which bails
> out if:
> 
> the request ID > the input base + number of IDs
> 
> This works as the spec defined, unfortunately some firmware didn't
> minus one for the number of IDs in the range, and the propoased
> solution will break those systems in this way:
> 
> PCI hostbridge mapping entry 1:
> Input base:  0x1000
> ID Count:    0x100
> Output base: 0x1000
> Output reference: 0xC4  //ITS reference
> 
> PCI hostbridge mapping entry 2:
> Input base:  0x1100
> ID Count:    0x100
> Output base: 0x2000
> Output reference: 0xD4  //ITS reference
> 
> Two mapping entries which the second entry's Input base = the first
> entry's Input base + ID count, so for requester ID 0x1100 will map
> to ITS 0xC4 not 0xD4 if we update '>=' to '>'.
> 
> So introduce a workaround to match the IORT's OEM information for
> the broken firmware, also update the logic of the ID mapping for
> firmwares report the number of IDs as the IORT spec defined, to
> make the code compatible for both kinds of system.
> 
> I checked the ACPI tables in the tianocore/edk2-platforms [2], only
> HiSilicon HIP07/08 did wrong, so just add HIP07/08 to the workaround
> info table, if we break other platforms, we can add that later.
> 
> [0]:
> http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_
> Remapping_Table.pdf
> [1]: https://patchwork.kernel.org/patch/11292823/
> [2]: https://github.com/tianocore/edk2-platforms
> 
> Cc: Pankaj Bansal <pankaj.bansal at nxp.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> Signed-off-by: Hanjun Guo <guohanjun at huawei.com>
> ---
>  drivers/acpi/arm64/iort.c | 54
> ++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 51 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index 33f7198..112b1b0 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -298,6 +298,41 @@ static acpi_status iort_match_node_callback(struct
> acpi_iort_node *node,
>  	return status;
>  }
> 
> +struct iort_workaround_oem_info {
> +	char oem_id[ACPI_OEM_ID_SIZE + 1];
> +	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
> +	u32 oem_revision;
> +};
> +
> +static bool apply_id_count_workaround;
> +
> +static struct iort_workaround_oem_info wa_info[] __initdata = {
> +	{
> +		.oem_id		= "HISI  ",
> +		.oem_table_id	= "HIP07   ",
> +		.oem_revision	= 0,
> +	}, {
> +		.oem_id		= "HISI  ",
> +		.oem_table_id	= "HIP08   ",
> +		.oem_revision	= 0,
> +	}
> +};
> +
> +static void __init
> +iort_check_id_count_workaround(struct acpi_table_header *tbl)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(wa_info); i++) {
> +		if (!memcmp(wa_info[i].oem_id, tbl->oem_id, ACPI_OEM_ID_SIZE)
> &&
> +		    !memcmp(wa_info[i].oem_table_id, tbl->oem_table_id,
> ACPI_OEM_TABLE_ID_SIZE) &&
> +		    wa_info[i].oem_revision == tbl->oem_revision) {
> +			apply_id_count_workaround = true;
> +			break;
> +		}
> +	}
> +}
> +

Can we get rid of the above and instead use acpi_match_platform_list() ? Please 
take a look at the pmcg_plat_info used for the HIP08 SMMUv3 PMCG erratum.

Thanks,
Shameer

>  static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
>  		       u32 *rid_out)
>  {
> @@ -314,9 +349,21 @@ static int iort_id_map(struct acpi_iort_id_mapping
> *map, u8 type, u32 rid_in,
>  		return -ENXIO;
>  	}
> 
> -	if (rid_in < map->input_base ||
> -	    (rid_in >= map->input_base + map->id_count))
> -		return -ENXIO;
> +	/*
> +	 * IORT spec says Number of IDs = The number of IDs in the range minus
> +	 * one, but the IORT code ingored the "minus one", and some firmware
> +	 * did that too, so apply a workaround here to keep compatible with
> +	 * both new and old versions of the firmware.
> +	 */
> +	if (apply_id_count_workaround) {
> +		if (rid_in < map->input_base ||
> +			(rid_in >= map->input_base + map->id_count))
> +			return -ENXIO;
> +	} else {
> +		if (rid_in < map->input_base ||
> +			(rid_in > map->input_base + map->id_count))
> +			return -ENXIO;
> +	}
> 
>  	*rid_out = map->output_base + (rid_in - map->input_base);
>  	return 0;
> @@ -1631,5 +1678,6 @@ void __init acpi_iort_init(void)
>  		return;
>  	}
> 
> +	iort_check_id_count_workaround(iort_table);
>  	iort_init_platform_devices();
>  }
> --
> 1.7.12.4
> 
> _______________________________________________
> Linuxarm mailing list
> Linuxarm at huawei.com
> http://hulk.huawei.com/mailman/listinfo/linuxarm



More information about the linux-arm-kernel mailing list