[PATCH 0/3] ARM: dts: sun8i: R40: DT fixes and updates

Andre Przywara andre.przywara at arm.com
Wed Jan 1 17:26:54 PST 2020


Hi,

some changes I made to the R40 .dtsi when playing around with a
Bananapi M2 Berry board:
- The GICC region is wrongly reported as 4K only, preventing KVM
  from using its VGIC emulation.
- The PMU node is missing, similar story as with the other SoCs: this
  time the SPI numbers are not even mentioned in the manual.
- I hooked up a SPI flash to the PortC SPI0 header pins (from which
  the board can even boot from). So patch 3 adds the SPI nodes and its
  pinmux setup, in case people need this for their peripherals.

Please have a look and apply!

Cheers,
Andre.

Andre Przywara (3):
  ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K
  ARM: dts: sun8i: R40: Add PMU node
  ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes

 arch/arm/boot/dts/sun8i-r40.dtsi | 108 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 103 insertions(+), 5 deletions(-)

-- 
2.14.5




More information about the linux-arm-kernel mailing list