[PATCH] ARM: dts: da850: add MMD SDIO interrupts

[David Lechner]

This adds the MMC SDIO interrupts to the MMC nodes in the device tree
for TI DA850/AM18XX/OMAP-L138.

The missing interrupts were causing the following error message to be
printed:

    davinci_mmc 1c40000.mmc: IRQ index 1 not found

Signed-off-by: David Lechner <david at lechnology.com>
---
 arch/arm/boot/dts/da850.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 7cf31b6e48b7..d2c609e4da5b 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -537,7 +537,7 @@ mmc0: mmc at 40000 {
 			reg = <0x40000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <16>;
+			interrupts = <16>, <17>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc0 5>;
@@ -567,7 +567,7 @@ mmc1: mmc at 21b000 {
 			reg = <0x21b000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <72>;
+			interrupts = <72>, <73>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc1 18>;
-- 
2.25.1