[PATCH v3 00/13] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi

[Cristian Ciocaltea]

On Thu, Dec 31, 2020 at 01:24:35PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Dec 29, 2020 at 11:17:15PM +0200, Cristian Ciocaltea wrote:
> > Hi,
> > 
> > This patchset brings a series of improvements for the Actions Semi S500
> > SoCs family, by adding support for Clock & Reset Management Units, DMA,
> > MMC, I2C & SIRQ controllers.
> > 
> > Please note the patches consist mostly of DTS and bindings/compatibles
> > changes, since all the work they depend on has been already merged,
> > i.e. clock fixes/additions, pinctrl driver, sirq driver.
> > 
> > For the moment, I have only enabled the features I could test on
> > RoseapplePi SBC.
> > 
> 
> Applied all patches except the 2 dmaengine patches for v5.12. Andreas, please
> let me know if you want to do the PR this time. Else I'll proceed.

Thank you, Mani!
The dmaengine patches should be picked up by Vinod, right?

> Thanks,
> Mani
> 
> > Thanks,
> > Cristi
> > 
> > Changes in v3:
> > - Squashed 'arm: dts: owl-s500-roseapplepi: Use UART clock from CMU' with
> >   'arm: dts: owl-s500: Set CMU clocks for UARTs', according to Mani's review
> > - Rebased series on v5.11-rc1 and dropped the already merged patches:
> >  * dt-bindings: mmc: owl: Add compatible string for Actions Semi S500 SoC
> >  * dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
> >  * MAINTAINERS: Update entry for Actions Semi Owl I2C binding
> >  * i2c: owl: Add compatible for the Actions Semi S500 I2C controller
> > 
> > Changes in v2:
> > - Added new bindings/compatibles for S500 DMA, MMC & I2C controllers
> > - Added support for the SIRQ controller
> > - Added new entries in MAINTAINERS
> > - Updated naming of some patches in v1
> > 
> > Cristian Ciocaltea (13):
> >   arm: dts: owl-s500: Add Clock Management Unit
> >   arm: dts: owl-s500: Set CMU clocks for UARTs
> >   arm: dts: owl-s500: Add Reset controller
> >   dt-bindings: dma: owl: Add compatible string for Actions Semi S500 SoC
> >   dmaengine: owl: Add compatible for the Actions Semi S500 DMA
> >     controller
> >   arm: dts: owl-s500: Add DMA controller
> >   arm: dts: owl-s500: Add pinctrl & GPIO support
> >   arm: dts: owl-s500: Add MMC support
> >   arm: dts: owl-s500: Add I2C support
> >   arm: dts: owl-s500: Add SIRQ controller
> >   arm: dts: owl-s500-roseapplepi: Add uSD support
> >   arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
> >   MAINTAINERS: Add linux-actions ML for Actions Semi Arch
> > 
> >  .../devicetree/bindings/dma/owl-dma.yaml      |   7 +-
> >  MAINTAINERS                                   |   1 +
> >  arch/arm/boot/dts/owl-s500-cubieboard6.dts    |   7 -
> >  .../arm/boot/dts/owl-s500-guitar-bb-rev-b.dts |   7 -
> >  .../arm/boot/dts/owl-s500-labrador-base-m.dts |   7 -
> >  arch/arm/boot/dts/owl-s500-roseapplepi.dts    |  97 +++++++++++-
> >  arch/arm/boot/dts/owl-s500-sparky.dts         |   7 -
> >  arch/arm/boot/dts/owl-s500.dtsi               | 140 ++++++++++++++++++
> >  drivers/dma/owl-dma.c                         |   3 +-
> >  9 files changed, 239 insertions(+), 37 deletions(-)
> > 
> > -- 
> > 2.30.0
> >