[PATCH 5/7] arm64: dts: ls1088a: use constants in the clockgen phandle
Michael Walle
michael at walle.cc
Tue Dec 29 06:47:38 EST 2020
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael at walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 91 +++++++++++++------
1 file changed, 64 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 6403455ed039..95647e5afb02 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -7,6 +7,7 @@
* Harninder Rai <harninder.rai at nxp.com>
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -48,7 +49,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -57,7 +58,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -75,7 +76,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -84,7 +85,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -93,7 +94,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -279,7 +280,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <6>;
status = "disabled";
};
@@ -287,7 +289,8 @@
duart0: serial at 21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -295,7 +298,8 @@
duart1: serial at 21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -360,7 +364,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -370,7 +375,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -380,7 +386,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -390,7 +397,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -403,7 +411,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -412,7 +423,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
clock-frequency = <0>;
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -447,7 +458,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -698,7 +710,8 @@
ptp-timer at 8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
little-endian;
fsl,extts-fifo;
};
@@ -787,56 +800,80 @@
cluster1_core0_watchdog: wdt at c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt at c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core2_watchdog: wdt at c020000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core3_watchdog: wdt at c030000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt at c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt at c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core2_watchdog: wdt at c120000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core3_watchdog: wdt at c130000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
--
2.20.1
More information about the linux-arm-kernel
mailing list