[PATCH net-next v2 1/6] bcm63xx_enet: batch process rx path

[Florian Fainelli]

On 12/24/2020 6:24 AM, Sieng Piaw Liew wrote:
> Use netif_receive_skb_list to batch process rx skb.
> Tested on BCM6328 320 MHz using iperf3 -M 512, increasing performance
> by 12.5%.
> 
> Before:
> [ ID] Interval           Transfer     Bandwidth       Retr
> [  4]   0.00-30.00  sec   120 MBytes  33.7 Mbits/sec  277         sender
> [  4]   0.00-30.00  sec   120 MBytes  33.5 Mbits/sec            receiver
> 
> After:
> [ ID] Interval           Transfer     Bandwidth       Retr
> [  4]   0.00-30.00  sec   136 MBytes  37.9 Mbits/sec  203         sender
> [  4]   0.00-30.00  sec   135 MBytes  37.7 Mbits/sec            receiver
> 
> Signed-off-by: Sieng Piaw Liew <liew.s.piaw at gmail.com>

Acked-by: Florian Fainelli <f.fainelli at gmail.com>
-- 
Florian