[PATCH 3/5] gpio: thunderx: Utilize for_each_set_clump macro

[Syed Nayyar Waris]

This patch reimplements the thunderx_gpio_set_multiple function in
drivers/gpio/gpio-thunderx.c to use the new for_each_set_clump macro.
Instead of looping for each bank in thunderx_gpio_set_multiple
function, now we can skip bank which is not set and save cycles.

Cc: William Breathitt Gray <vilhelm.gray at gmail.com>
Cc: Robert Richter <rrichter at marvell.com>
Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
Signed-off-by: Syed Nayyar Waris <syednwaris at gmail.com>
---
 drivers/gpio/gpio-thunderx.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-thunderx.c b/drivers/gpio/gpio-thunderx.c
index 9f66deab46ea..716b75ba7df6 100644
--- a/drivers/gpio/gpio-thunderx.c
+++ b/drivers/gpio/gpio-thunderx.c
@@ -16,6 +16,7 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <asm-generic/msi.h>
+#include <../drivers/gpio/clump_bits.h>
 
 
 #define GPIO_RX_DAT	0x0
@@ -275,12 +276,15 @@ static void thunderx_gpio_set_multiple(struct gpio_chip *chip,
 				       unsigned long *bits)
 {
 	int bank;
-	u64 set_bits, clear_bits;
+	unsigned long set_bits, clear_bits, gpio_mask;
+	unsigned long offset;
+
 	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
 
-	for (bank = 0; bank <= chip->ngpio / 64; bank++) {
-		set_bits = bits[bank] & mask[bank];
-		clear_bits = ~bits[bank] & mask[bank];
+	for_each_set_clump(offset, gpio_mask, mask, chip->ngpio, 64) {
+		bank = offset / 64;
+		set_bits = bits[bank] & gpio_mask;
+		clear_bits = ~bits[bank] & gpio_mask;
 		writeq(set_bits, txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_SET);
 		writeq(clear_bits, txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_CLR);
 	}
-- 
2.29.0