[PATCH v3 6/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
Jagan Teki
jagan at amarulasolutions.com
Wed Dec 23 06:03:43 EST 2020
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
PCIe, DSI, CSI nodes will add it into imx8mm-engicam-edimm2.2.dtsi once
Mainline Linux supported.
Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi at engicam.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
Changes for v2:
- updated commit message
- dropped engicam from filename since it aligned with imx6 engicam
dts files naming conventions.
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mm-engicam-edimm2.2.dtsi | 82 +++++++++++++++++++
.../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 21 +++++
3 files changed, 104 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-edimm2.2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 8d49a2c74604..43783076f856 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-engicam-edimm2.2.dtsi
new file mode 100644
index 000000000000..f7870efd9dab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-engicam-edimm2.2.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ no-1-8-v;
+ pm-ignore-notify;
+ keep-power-in-suspend;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
new file mode 100644
index 000000000000..672aee1800c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-engicam-edimm2.2.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+ model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit";
+ compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm",
+ "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
--
2.25.1
More information about the linux-arm-kernel
mailing list