[PATCH] arm64: dts: mt8192: add thermal zones, cooling map and trips
Michael Kao
michael.kao at mediatek.com
Wed Dec 23 02:49:44 EST 2020
Add thermal zone node to support mt8192 read temperature.
Thermal throttle will start at 68C and the
target temperature is 85C.
This patch depends on [1].
[1]https://patchwork.kernel.org/project/linux-mediatek/patch/20201221061018.18503-3-Yz.Wu@mediatek.com/
Signed-off-by: Michael Kao <michael.kao at mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 169 +++++++++++++++++++++++
1 file changed, 169 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 4a0d941aec30..4020e40a092a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "mediatek,mt8192";
@@ -42,6 +43,7 @@
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu1: cpu at 100 {
@@ -52,6 +54,7 @@
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu2: cpu at 200 {
@@ -62,6 +65,7 @@
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu3: cpu at 300 {
@@ -72,6 +76,7 @@
clock-frequency = <1701000000>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu4: cpu at 400 {
@@ -82,6 +87,7 @@
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu5: cpu at 500 {
@@ -92,6 +98,7 @@
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu6: cpu at 600 {
@@ -102,6 +109,7 @@
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu7: cpu at 700 {
@@ -112,6 +120,7 @@
clock-frequency = <2171000000>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu-map {
@@ -178,6 +187,140 @@
method = "smc";
};
+ thermal-zones {
+ soc_max {
+ polling-delay = <1000>; /* milliseconds */
+ polling-delay-passive = <1000>; /* milliseconds */
+ thermal-sensors = <&lvts 0>;
+ sustainable-power = <1500>;
+
+ trips {
+ threshold: trip-point at 0 {
+ temperature = <68000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: target at 1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc_max_crit: soc_max_crit at 0 {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu1
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu2
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu3
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ contribution = <3072>;
+ };
+ map1 {
+ trip = <&target>;
+ cooling-device = <&cpu4
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu5
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu6
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu7
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ contribution = <1024>;
+ };
+ };
+ };
+ cpu_big1 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 1>;
+ };
+ cpu_big2 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 2>;
+ };
+ cpu_big3 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 3>;
+ };
+ cpu_big4 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 4>;
+ };
+ cci1 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 5>;
+ };
+ cci2 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 6>;
+ };
+ cpu_little1 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 7>;
+ };
+ cpu_little2 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 8>;
+ };
+ apu {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 9>;
+ };
+ mlda {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 10>;
+ };
+ gpu1 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 11>;
+ };
+ gpu2 {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 12>;
+ };
+ infra {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 13>;
+ };
+ camsys {
+ polling-delay = <0>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&lvts 14>;
+ };
+ };
+
timer: timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -224,6 +367,10 @@
compatible = "mediatek,mt8192-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
+ ti,reset-bits = <
+ 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE)
+ 0x730 12 0x734 12 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE)
+ >;
};
pericfg: syscon at 10003000 {
@@ -318,6 +465,24 @@
status = "disabled";
};
+ lvts: lvts at 1100b000 {
+ compatible = "mediatek,mt6873-lvts";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x1100b000 0 0x1000>,
+ <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "lvts_clk";
+
+ resets = <&infracfg_rst 0>,
+ <&infracfg_rst 1>;
+
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "e_data1";
+ };
+
spi1: spi at 11010000 {
compatible = "mediatek,mt8192-spi",
"mediatek,mt6765-spi";
@@ -425,6 +590,10 @@
efuse: efuse at 11c10000 {
compatible = "mediatek,mt8192-efuse",
"mediatek,efuse";
+
+ lvts_e_data1: data1 {
+ reg = <0x1C0 0x58>;
+ };
};
i2c3: i2c3 at 11cb0000 {
--
2.18.0
More information about the linux-arm-kernel
mailing list