[PATCH AUTOSEL 5.4 062/130] ARM: dts: hisilicon: fix errors detected by pl011.yaml
Sasha Levin
sashal at kernel.org
Tue Dec 22 21:17:05 EST 2020
From: Zhen Lei <thunder.leizhen at huawei.com>
[ Upstream commit e5e225fd495ef1dffc64b81b2094e427f9cc4016 ]
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same
clock.
3. Change pinctrl-names to "default", "sleep".
Signed-off-by: Zhen Lei <thunder.leizhen at huawei.com>
Signed-off-by: Wei Xu <xuwei5 at hisilicon.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
arch/arm/boot/dts/hi3519.dtsi | 20 +++++++++----------
arch/arm/boot/dts/hi3620-hi4511.dts | 20 +++++++++----------
arch/arm/boot/dts/hi3620.dtsi | 30 ++++++++++++++---------------
arch/arm/boot/dts/hisi-x5hd2.dtsi | 30 ++++++++++++++---------------
4 files changed, 50 insertions(+), 50 deletions(-)
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
index 410409a0ed662..630753c0d7044 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -52,8 +52,8 @@ uart0: serial at 12100000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12100000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART0_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -61,8 +61,8 @@ uart1: serial at 12101000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12101000 0x1000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART1_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -70,8 +70,8 @@ uart2: serial at 12102000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12102000 0x1000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART2_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -79,8 +79,8 @@ uart3: serial at 12103000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12103000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART3_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -88,8 +88,8 @@ uart4: serial at 12104000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12104000 0x1000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART4_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index 8c703c3f2fe09..1c62bdcca647a 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -27,36 +27,36 @@ dual_timer0: dual_timer at 800000 {
status = "ok";
};
- uart0: uart at b00000 { /* console */
- pinctrl-names = "default", "idle";
+ uart0: serial at b00000 { /* console */
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
status = "ok";
};
- uart1: uart at b01000 { /* modem */
- pinctrl-names = "default", "idle";
+ uart1: serial at b01000 { /* modem */
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
status = "ok";
};
- uart2: uart at b02000 { /* audience */
- pinctrl-names = "default", "idle";
+ uart2: serial at b02000 { /* audience */
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
status = "ok";
};
- uart3: uart at b03000 {
- pinctrl-names = "default", "idle";
+ uart3: serial at b03000 {
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
status = "ok";
};
- uart4: uart at b04000 {
- pinctrl-names = "default", "idle";
+ uart4: serial at b04000 {
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
status = "ok";
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 9c207a690df50..cb7e932e094f6 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -162,48 +162,48 @@ timer5: timer at 600 {
interrupts = <1 13 0xf01>;
};
- uart0: uart at b00000 {
+ uart0: serial at b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb00000 0x1000>;
interrupts = <0 20 4>;
- clocks = <&clock HI3620_UARTCLK0>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart1: uart at b01000 {
+ uart1: serial at b01000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb01000 0x1000>;
interrupts = <0 21 4>;
- clocks = <&clock HI3620_UARTCLK1>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart2: uart at b02000 {
+ uart2: serial at b02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb02000 0x1000>;
interrupts = <0 22 4>;
- clocks = <&clock HI3620_UARTCLK2>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart3: uart at b03000 {
+ uart3: serial at b03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb03000 0x1000>;
interrupts = <0 23 4>;
- clocks = <&clock HI3620_UARTCLK3>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart4: uart at b04000 {
+ uart4: serial at b04000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb04000 0x1000>;
interrupts = <0 24 4>;
- clocks = <&clock HI3620_UARTCLK4>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 696e6982a688b..d8800992b4d0c 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -86,48 +86,48 @@ timer4: timer at a81000 {
status = "disabled";
};
- uart0: uart at b00000 {
+ uart0: serial at b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b00000 0x1000>;
interrupts = <0 49 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart1: uart at 6000 {
+ uart1: serial at 6000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00006000 0x1000>;
interrupts = <0 50 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart2: uart at b02000 {
+ uart2: serial at b02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b02000 0x1000>;
interrupts = <0 51 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart3: uart at b03000 {
+ uart3: serial at b03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b03000 0x1000>;
interrupts = <0 52 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart4: uart at b04000 {
+ uart4: serial at b04000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb04000 0x1000>;
interrupts = <0 53 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
--
2.27.0
More information about the linux-arm-kernel
mailing list