[PATCH 11/14] dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge binding

[Laurent Pinchart]

Hi Liu,

Thank you for the patch.

On Thu, Dec 17, 2020 at 05:59:30PM +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB).
> 
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
>  .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml   | 185 +++++++++++++++++++++
>  1 file changed, 185 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
> new file mode 100644
> index 00000000..4e5ff6f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
> @@ -0,0 +1,185 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qm/qxp LVDS Display Bridge
> +
> +maintainers:
> +  - Liu Ying <victor.liu at nxp.com>
> +
> +description: |
> +  The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
> +
> +  For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
> +  format and can map the input to VESA or JEIDA standards.  The two channels
> +  cannot be used simultaneously, that is to say, the user should pick one of
> +  them to use.  Two LDB channels from two LDB instances can work together in
> +  LDB split mode to support a dual link LVDS display.  The channel indexes
> +  have to be different.  Channel0 outputs odd pixels and channel1 outputs
> +  even pixels.

In this case, does the display controller output odd pixels and even
pixels separately to the two LVDS channels, with each channel
effectively be a separate LVDS encoder ? Could you give an example of DT
integration for dual-link LVDS support, with the display controller, two
LDB instances, and a dual-link LVDS panel ?

> +
> +  For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
> +  input color format.  The two channels can be used simultaneously, either
> +  in dual mode or split mode.  In dual mode, the two channels output identical
> +  data.  In split mode, channel0 outputs odd pixels and channel1 outputs even
> +  pixels.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8qm-ldb
> +      - fsl,imx8qxp-ldb
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  clocks:
> +    items:
> +      - description: pixel clock
> +      - description: bypass clock
> +
> +  clock-names:
> +    items:
> +      - const: pixel
> +      - const: bypass
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  fsl,syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: |
> +      A phandle which points to Control and Status Registers(CSR) module.
> +
> +  fsl,companion-ldb:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: |
> +      A phandle which points to companion LDB which is used in LDB split mode.
> +
> +patternProperties:
> +  "^channel@[0-1]$":
> +    type: object
> +    description: Represents a channel of LDB.
> +
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      reg:
> +        description: The channel index.
> +        enum: [ 0, 1 ]
> +
> +      phys:
> +        description: A phandle to the phy module representing the LVDS PHY.
> +        maxItems: 1
> +
> +      phy-names:
> +        const: lvds_phy
> +
> +      port at 0:
> +        type: object
> +        description: Input port of the channel.
> +
> +        properties:
> +          reg:
> +            const: 0
> +
> +        required:
> +          - reg
> +
> +      port at 1:
> +        type: object
> +        description: Output port of the channel.
> +
> +        properties:
> +          reg:
> +            const: 1
> +
> +        required:
> +          - reg
> +
> +    required:
> +      - "#address-cells"
> +      - "#size-cells"
> +      - reg
> +      - phys
> +      - phy-names
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - fsl,syscon
> +  - channel at 0
> +  - channel at 1
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qm-ldb
> +    then:
> +      properties:
> +        fsl,companion-ldb: false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/firmware/imx/rsrc.h>
> +    ldb {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        compatible = "fsl,imx8qxp-ldb";
> +        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
> +                 <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
> +        clock-names = "pixel", "bypass";
> +        power-domains = <&pd IMX_SC_R_LVDS_0>;
> +        fsl,syscon = <&mipi_lvds_0_csr>;
> +
> +        channel at 0 {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            reg = <0>;
> +            phys = <&mipi_lvds_0_phy>;
> +            phy-names = "lvds_phy";
> +
> +            port at 0 {
> +                reg = <0>;
> +
> +                mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
> +                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
> +                };
> +            };
> +        };
> +
> +        channel at 1 {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            reg = <1>;
> +            phys = <&mipi_lvds_0_phy>;
> +            phy-names = "lvds_phy";
> +
> +            port at 0 {
> +                reg = <0>;
> +
> +                mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
> +                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
> +                };
> +            };
> +        };
> +    };

-- 
Regards,

Laurent Pinchart