[PATCH v2 13/14] arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for SERDES

[Kishon Vijay Abraham I]

Use external clock for all the SERDES used by PCIe controller. This will
make the same clock used by the local SERDES as well as the clock
provided to the PCIe connector.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 86f7ab511ee8..788126daf91c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -639,6 +639,51 @@
 	clock-frequency = <100000000>;
 };
 
+&wiz0_pll1_refclk {
+	assigned-clocks = <&wiz0_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz0_refclk_dig {
+	assigned-clocks = <&wiz0_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&serdes0_pll_cmnlc {
+	assigned-clocks = <&serdes0_pll_cmnlc>;
+	assigned-clock-parents = <&serdes0_refrcv1>;
+};
+
+&wiz1_pll1_refclk {
+	assigned-clocks = <&wiz1_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz1_refclk_dig {
+	assigned-clocks = <&wiz1_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&serdes1_pll_cmnlc {
+	assigned-clocks = <&serdes1_pll_cmnlc>;
+	assigned-clock-parents = <&serdes1_refrcv1>;
+};
+
+&wiz2_pll1_refclk {
+	assigned-clocks = <&wiz2_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz2_refclk_dig {
+	assigned-clocks = <&wiz2_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&serdes2_pll_cmnlc {
+	assigned-clocks = <&serdes2_pll_cmnlc>;
+	assigned-clock-parents = <&serdes2_refrcv1>;
+};
+
 &serdes0 {
 	serdes0_pcie_link: link at 0 {
 		reg = <0>;
-- 
2.17.1