[PATCH v2 00/14] PHY: Add support in Sierra to use external clock
Kishon Vijay Abraham I
kishon at ti.com
Tue Dec 22 02:05:06 EST 2020
The previous version of the patch series can be found @ [1]
Changes from v1:
1) Remove the part that prevents configuration if the SERDES is already
configured and focus only on using external clock and the associated
cleanups
2) Change patch ordering
3) Use exclusive reset control APIs
4) Fix error handling code
5) Include DT patches in this series (I can send this separately to DT
MAINTAINER once the driver patches are merged)
[1] -> http://lore.kernel.org/r/20201103035556.21260-1-kishon@ti.com
Kishon Vijay Abraham I (14):
phy: cadence: Sierra: Fix PHY power_on sequence
phy: ti: j721e-wiz: Invoke wiz_init() before
of_platform_device_create()
dt-bindings: phy: cadence-sierra: Add bindings for the PLLs within
SERDES
phy: ti: j721e-wiz: Get PHY properties only for "phy" or "link"
subnode
phy: cadence: cadence-sierra: Create PHY only for "phy" or "link"
sub-nodes
phy: cadence: cadence-sierra: Move all clk_get_*() to a separate
function
phy: cadence: cadence-sierra: Move all reset_control_get*() to a
separate function
phy: cadence: cadence-sierra: Explicitly request exclusive reset
control
phy: cadence: sierra: Model reference receiver as clocks (gate clocks)
phy: cadence: sierra: Enable pll_cmnlc and pll_cmnlc1 clocks
arm64: dts: ti: k3-j721e-main: Add DT nodes for clocks within Sierra
SERDES
arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for
SERDES
arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as
"phy"
.../bindings/phy/phy-cadence-sierra.yaml | 89 ++-
.../dts/ti/k3-j721e-common-proc-board.dts | 57 +-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 186 ++++--
drivers/phy/cadence/phy-cadence-sierra.c | 543 ++++++++++++++++--
drivers/phy/ti/phy-j721e-wiz.c | 21 +-
5 files changed, 808 insertions(+), 88 deletions(-)
--
2.17.1
More information about the linux-arm-kernel
mailing list