[PATCH v2 15/15] clk: xilinx: move xlnx_vcu clock driver from soc
Michael Tretter
m.tretter at pengutronix.de
Mon Dec 21 10:06:34 EST 2020
The xlnx_vcu driver is actually a clock controller driver which provides
clocks that can be used by a driver for the encoder/decoder units. There
is no reason to keep this driver in soc. Move the driver to clk.
NOTE: The register mapping actually contains registers for AXI
performance monitoring, but these are not used by the driver.
Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
---
Changelog:
v2:
- New patch
---
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/xilinx/Kconfig | 19 +++++++++++++++++++
drivers/clk/xilinx/Makefile | 2 ++
drivers/{soc => clk}/xilinx/xlnx_vcu.c | 0
drivers/soc/xilinx/Kconfig | 17 -----------------
drivers/soc/xilinx/Makefile | 1 -
7 files changed, 23 insertions(+), 18 deletions(-)
create mode 100644 drivers/clk/xilinx/Kconfig
create mode 100644 drivers/clk/xilinx/Makefile
rename drivers/{soc => clk}/xilinx/xlnx_vcu.c (100%)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c715d4681a0b..f4b13e7c84de 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -383,6 +383,7 @@ source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
source "drivers/clk/uniphier/Kconfig"
source "drivers/clk/x86/Kconfig"
+source "drivers/clk/xilinx/Kconfig"
source "drivers/clk/zynqmp/Kconfig"
endif
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index da8fcf147eb1..44477b84acef 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -121,6 +121,7 @@ obj-y += versatile/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_X86) += x86/
endif
+obj-y += xilinx/
obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/
diff --git a/drivers/clk/xilinx/Kconfig b/drivers/clk/xilinx/Kconfig
new file mode 100644
index 000000000000..5224114176ed
--- /dev/null
+++ b/drivers/clk/xilinx/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config XILINX_VCU
+ tristate "Xilinx VCU logicoreIP Init"
+ depends on HAS_IOMEM && COMMON_CLK
+ select REGMAP_MMIO
+ help
+ Provides the driver to enable and disable the isolation between the
+ processing system and programmable logic part by using the logicoreIP
+ register set. This driver also configures the frequency based on the
+ clock information from the logicoreIP register set.
+
+ If you say yes here you get support for the logicoreIP.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xlnx_vcu.
+
diff --git a/drivers/clk/xilinx/Makefile b/drivers/clk/xilinx/Makefile
new file mode 100644
index 000000000000..dee8fd51e303
--- /dev/null
+++ b/drivers/clk/xilinx/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_XILINX_VCU) += xlnx_vcu.o
diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/clk/xilinx/xlnx_vcu.c
similarity index 100%
rename from drivers/soc/xilinx/xlnx_vcu.c
rename to drivers/clk/xilinx/xlnx_vcu.c
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 9fe703772e5a..53af9115dc31 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -1,23 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
menu "Xilinx SoC drivers"
-config XILINX_VCU
- tristate "Xilinx VCU logicoreIP Init"
- depends on HAS_IOMEM && COMMON_CLK
- select REGMAP_MMIO
- help
- Provides the driver to enable and disable the isolation between the
- processing system and programmable logic part by using the logicoreIP
- register set. This driver also configures the frequency based on the
- clock information from the logicoreIP register set.
-
- If you say yes here you get support for the logicoreIP.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called xlnx_vcu.
-
config ZYNQMP_POWER
bool "Enable Xilinx Zynq MPSoC Power Management driver"
depends on PM && ZYNQMP_FIRMWARE
diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile
index f66bfea5de17..9854e6f6086b 100644
--- a/drivers/soc/xilinx/Makefile
+++ b/drivers/soc/xilinx/Makefile
@@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_XILINX_VCU) += xlnx_vcu.o
obj-$(CONFIG_ZYNQMP_POWER) += zynqmp_power.o
obj-$(CONFIG_ZYNQMP_PM_DOMAINS) += zynqmp_pm_domains.o
--
2.20.1
More information about the linux-arm-kernel
mailing list