[PATCH v2 03/15] soc: xilinx: vcu: drop coreclk from struct xlnx_vcu

[Michael Tretter]

The coreclk field is newer read after being written to xlnx_vcu. Remove
the coreclk field from the xlnx_vcu and use a function local variable
instead.

Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
---
Changelog:

v2: none
---
 drivers/soc/xilinx/xlnx_vcu.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c
index 14daad4efc58..7da9643820a8 100644
--- a/drivers/soc/xilinx/xlnx_vcu.c
+++ b/drivers/soc/xilinx/xlnx_vcu.c
@@ -73,7 +73,6 @@
  * @aclk: axi clock source
  * @logicore_reg_ba: logicore reg base address
  * @vcu_slcr_ba: vcu_slcr Register base address
- * @coreclk: core clock frequency
  */
 struct xvcu_device {
 	struct device *dev;
@@ -81,7 +80,6 @@ struct xvcu_device {
 	struct clk *aclk;
 	struct regmap *logicore_reg_ba;
 	void __iomem *vcu_slcr_ba;
-	u32 coreclk;
 };
 
 static struct regmap_config vcu_settings_regmap_config = {
@@ -358,10 +356,10 @@ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
 		return -EINVAL;
 	}
 
-	xvcu->coreclk = pll_clk / divisor_core;
+	coreclk = pll_clk / divisor_core;
 	mcuclk = pll_clk / divisor_mcu;
 	dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk);
-	dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", xvcu->coreclk);
+	dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", coreclk);
 	dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk);
 
 	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK << VCU_PLL_CTRL_FBDIV_SHIFT);
-- 
2.20.1