[PATCH v3 0/5] Remove LPC register partitioning
Chia-Wei, Wang
chiawei_wang at aspeedtech.com
Mon Dec 21 00:56:18 EST 2020
The LPC controller has no concept of the BMC and the Host partitions.
The incorrect partitioning can impose unnecessary range restrictions
on register access through the syscon regmap interface.
For instance, HICRB contains the I/O port address configuration
of KCS channel 1/2. However, the KCS#1/#2 drivers cannot access
HICRB as it is located at the other LPC partition.
In addition, to be backward compatible, the newly added HW control
bits could be located at any reserved bits over the LPC addressing
space.
Thereby, this patch series aims to remove the LPC partitioning for
better driver development and maintenance. This requires the change
to both the device tree and the driver implementation. To ensure
both sides are synchronously updated, a v2 binding check is added.
Changes since v2:
- Add v2 binding check to ensure the synchronization between the
device tree change and the driver register offset fix.
Changes since v1:
- Add the fix to the aspeed-lpc binding documentation.
Chia-Wei, Wang (5):
dt-bindings: aspeed-lpc: Remove LPC partitioning
ARM: dts: Remove LPC BMC and Host partitions
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
soc: aspeed: Adapt to new LPC device tree layout
.../devicetree/bindings/mfd/aspeed-lpc.txt | 99 +++----------
arch/arm/boot/dts/aspeed-g4.dtsi | 74 ++++------
arch/arm/boot/dts/aspeed-g5.dtsi | 135 ++++++++----------
arch/arm/boot/dts/aspeed-g6.dtsi | 135 ++++++++----------
drivers/char/ipmi/kcs_bmc_aspeed.c | 35 +++--
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 19 ++-
drivers/soc/aspeed/aspeed-lpc-ctrl.c | 20 ++-
drivers/soc/aspeed/aspeed-lpc-snoop.c | 23 +--
8 files changed, 232 insertions(+), 308 deletions(-)
--
2.17.1
More information about the linux-arm-kernel
mailing list