[PATCH v2 2/4] arm64: dts: imx8mq-librem5-devkit: Tweak pmic regulators

Krzysztof Kozlowski krzk at kernel.org
Sat Dec 19 07:25:19 EST 2020


On Thu, Dec 17, 2020 at 04:13:13PM +0100, Guido Günther wrote:
> BUCK3 needs a regulator-enable-ramp-delay since otherwise the board
> freezes on etnaviv probe. With this pgc_gpu suspends and resumes as
> expected. This must have been always broken since gpcv2 support was
> enabled.
> 
> We also enable all the regulators needed for Deep Sleep Mode (DSM) as
> always-on:
> 
> - VDD_SOC supplied by BUCK1
> - VDDA_1P8 supplied by BUCK7
> - VDDA_0P9 supplied by LDO4
> - VDDA_DRAM supplied by LDO3
> - NVCC_DRAM supplied by BUCK8
> - VDD_DRAM supplied by BUCK5
> 
> Finally LDO5 and LDO6 provide VDD_PHY_1V8 and VDD_PHY_0V9 used by the
> SOCs MIPI, HDMI and USB IP cores. While we would in theory be able to
> turn these off (and I've tested that or LDO6 and mipi with USB disabled)
> it is of little practical use atm since USB doesn't runtime suspend so
> let's revisit this at a later point.
> 
> Signed-off-by: Guido Günther <agx at sigxcpu.org>
> ---
>  .../boot/dts/freescale/imx8mq-librem5-devkit.dts      | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 

Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>

Best regards,
Krzysztof



More information about the linux-arm-kernel mailing list