[PATCH v2 2/2] ARM: dts: sun8i-v3s: Add PWM controller and pins definitions

[Paul Kocialkowski]

This introduces definitions for the PWM controller found in the V3s,
as well as associated pins. This fashion of the controller has two PWM
outputs and is register-compatible with the A20.

Both PWM outputs were tested on a Lichee Pi Zero with a simple
transistor-LED setup.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index bff822b9fa01..f02aa988156d 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -404,6 +404,16 @@ spi0_pins: spi0-pins {
 				pins = "PC0", "PC1", "PC2", "PC3";
 				function = "spi0";
 			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB4";
+				function = "pwm0";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PB5";
+				function = "pwm1";
+			};
 		};
 
 		timer at 1c20c00 {
@@ -422,6 +432,15 @@ wdt0: watchdog at 1c20ca0 {
 			clocks = <&osc24M>;
 		};
 
+		pwm: pwm at 1c21400 {
+			compatible = "allwinner,sun8i-v3s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		lradc: lradc at 1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x400>;
-- 
2.29.2