[PATCH 8/8] ARM: dts: rockchip: remove clock-names property from watchdog node in rv1108.dtsi
Johan Jonker
jbx6244 at gmail.com
Fri Dec 18 07:05:34 EST 2020
A test with the command below gives this error:
/arch/arm/boot/dts/rv1108-evb.dt.yaml: watchdog at 10360000:
clock-names:0: 'tclk' was expected
Comment from the dw_wdt.c file:
Try to request the watchdog dedicated timer clock source. It must
be supplied if asynchronous mode is enabled. Otherwise fallback
to the common timer/bus clocks configuration, in which the very
first found clock supply both timer and APB signals.
Like in the other Rockchip watchdog nodes the property "clock-names"
is not needed, so remove it.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
arch/arm/boot/dts/rv1108.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 8ef8d038e..bec47e0be 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -304,7 +304,6 @@
reg = <0x10360000 0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_WDT>;
- clock-names = "pclk_wdt";
status = "disabled";
};
--
2.11.0
More information about the linux-arm-kernel
mailing list