[PATCH v7 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
Alice Guo (OSS)
alice.guo at oss.nxp.com
Fri Dec 18 02:45:44 EST 2020
> -----Original Message-----
> From: Rob Herring <robh at kernel.org>
> Sent: 2020年12月16日 4:33
> To: Alice Guo (OSS) <alice.guo at oss.nxp.com>
> Cc: shawnguo at kernel.org; s.hauer at pengutronix.de; kernel at pengutronix.de;
> festevam at gmail.com; krzk at kernel.org; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; dl-linux-imx
> <linux-imx at nxp.com>
> Subject: Re: [PATCH v7 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc
> unique ID
>
> On Tue, Dec 15, 2020 at 04:35:48PM +0800, Alice Guo (OSS) wrote:
> > From: Alice Guo <alice.guo at nxp.com>
> >
> > Add DT Binding doc for the Unique ID of i.MX 8M series.
> >
> > Signed-off-by: Alice Guo <alice.guo at nxp.com>
> > ---
> >
> > Changes for v7:
> > - change to a separate schema file
> > Changes for v6:
> > - none
> > Changes for v5:
> > - correct the error of using allOf
> > Changes for v4:
> > - use allOf to limit new version DTS files for i.MX8M to include
> > "fsl,imx8m*-soc", nvmem-cells and nvmem-cells-names Changes for v3:
> > - put it into Documentation/devicetree/bindings/arm/fsl.yaml
> > - modify the description of nvmem-cells
> > - use "make ARCH=arm64 dtbs_check" to make sure it is right Changes
> > for v2:
> > - remove the subject prefix "LF-2571-1"
> >
> > .../bindings/soc/imx/imx8m-soc.yaml | 54
> +++++++++++++++++++
> > 1 file changed, 54 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> > b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> > new file mode 100644
> > index 000000000000..a2f7dc0c9b35
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> > @@ -0,0 +1,54 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP i.MX8M Series SoC
> > +
> > +maintainers:
> > + - Alice Guo <alice.guo at nxp.com>
> > +
> > +description: |
> > + NXP i.MX8M series SoCs contain fuse entries from which SoC Unique
> > +ID can be
> > + obtained.
> > +
> > +select:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx8mm
> > + - fsl,imx8mn
> > + - fsl,imx8mp
> > + - fsl,imx8mq
> > + required:
> > + - compatible
> > +
> > +properties:
> > + soc:
> > + type: object
> > + properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - fsl,imx8mm-soc
> > + - fsl,imx8mn-soc
> > + - fsl,imx8mp-soc
> > + - fsl,imx8mq-soc
> > + - const: simple-bus
> > +
> > + nvmem-cells:
> > + maxItems: 1
> > + description: Phandle to the SOC Unique ID provided by a nvmem
> > + node
> > +
> > + nvmem-cells-names:
> > + const: soc_unique_id
> > +
> > + required:
> > + - compatible
> > + - nvmem-cells
> > + - nvmem-cell-names
>
> Anything else should be a node, so:
>
> additionalProperties:
> type: object
Hi, Rob
Thank you for your advice. When I add "additionalProperties: type: object",
use make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml, and then:
linux-next/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: /: #size-cells: [[2]] is not of type 'object'
From schema: /home/nxf55104/virtualization/upstream/linux-next/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
...
so I think I should remain it unchanged in v8.
Alice
> > +
> > +additionalProperties: true
> > +...
> > --
> > 2.17.1
> >
More information about the linux-arm-kernel
mailing list