[PATCH v12 2/4] powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c
Rob Herring
robh at kernel.org
Thu Dec 17 15:05:10 EST 2020
On Thu, Dec 17, 2020 at 09:37:06AM -0800, Lakshmi Ramasubramanian wrote:
> The functions defined in "arch/powerpc/kexec/ima.c" handle setting up
> and freeing the resources required to carry over the IMA measurement
> list from the current kernel to the next kernel across kexec system call.
> These functions do not have architecture specific code, but are
> currently limited to powerpc.
>
> Move setup_ima_buffer() call into of_kexec_setup_new_fdt().
>
> Move architecture independent functions from "arch/powerpc/kexec/ima.c"
> to "drivers/of/kexec.c". Delete "arch/powerpc/kexec/ima.c" and
> "arch/powerpc/include/asm/ima.h". Remove references to the deleted files
> in powerpc and in ima.
>
> delete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c"
> is not used anymore. Remove this function.
I think this patch should come first and then patch 1. Move then rework
the code.
>
> Signed-off-by: Lakshmi Ramasubramanian <nramas at linux.microsoft.com>
> ---
> arch/powerpc/include/asm/ima.h | 30 -----
> arch/powerpc/include/asm/kexec.h | 1 -
> arch/powerpc/kexec/Makefile | 7 -
> arch/powerpc/kexec/file_load.c | 39 ------
> arch/powerpc/kexec/ima.c | 182 --------------------------
> drivers/of/kexec.c | 198 +++++++++++++++++++++++++++++
> include/linux/of.h | 17 +++
> security/integrity/ima/ima.h | 4 -
> security/integrity/ima/ima_kexec.c | 2 +
> 9 files changed, 217 insertions(+), 263 deletions(-)
> delete mode 100644 arch/powerpc/include/asm/ima.h
> delete mode 100644 arch/powerpc/kexec/ima.c
>
> diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
> deleted file mode 100644
> index ead488cf3981..000000000000
> --- a/arch/powerpc/include/asm/ima.h
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef _ASM_POWERPC_IMA_H
> -#define _ASM_POWERPC_IMA_H
> -
> -struct kimage;
> -
> -int ima_get_kexec_buffer(void **addr, size_t *size);
> -int ima_free_kexec_buffer(void);
> -
> -#ifdef CONFIG_IMA
> -void remove_ima_buffer(void *fdt, int chosen_node);
> -#else
> -static inline void remove_ima_buffer(void *fdt, int chosen_node) {}
> -#endif
> -
> -#ifdef CONFIG_IMA_KEXEC
> -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
> - size_t size);
> -
> -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
> -#else
> -static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
> - int chosen_node)
> -{
> - remove_ima_buffer(fdt, chosen_node);
> - return 0;
> -}
> -#endif /* CONFIG_IMA_KEXEC */
> -
> -#endif /* _ASM_POWERPC_IMA_H */
> diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
> index dbf09d2f36d0..d4b7d2d6191d 100644
> --- a/arch/powerpc/include/asm/kexec.h
> +++ b/arch/powerpc/include/asm/kexec.h
> @@ -126,7 +126,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code,
> int setup_new_fdt(const struct kimage *image, void *fdt,
> unsigned long initrd_load_addr, unsigned long initrd_len,
> const char *cmdline);
> -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size);
>
> #ifdef CONFIG_PPC64
> struct kexec_buf;
> diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile
> index 4aff6846c772..b6c52608cb49 100644
> --- a/arch/powerpc/kexec/Makefile
> +++ b/arch/powerpc/kexec/Makefile
> @@ -9,13 +9,6 @@ obj-$(CONFIG_PPC32) += relocate_32.o
>
> obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS).o
>
> -ifdef CONFIG_HAVE_IMA_KEXEC
> -ifdef CONFIG_IMA
> -obj-y += ima.o
> -endif
> -endif
> -
> -
> # Disable GCOV, KCOV & sanitizers in odd or sensitive code
> GCOV_PROFILE_core_$(BITS).o := n
> KCOV_INSTRUMENT_core_$(BITS).o := n
> diff --git a/arch/powerpc/kexec/file_load.c b/arch/powerpc/kexec/file_load.c
> index 956bcb2d1ec2..f37652ccb8a1 100644
> --- a/arch/powerpc/kexec/file_load.c
> +++ b/arch/powerpc/kexec/file_load.c
> @@ -20,7 +20,6 @@
> #include <linux/of_fdt.h>
> #include <linux/libfdt.h>
> #include <asm/setup.h>
> -#include <asm/ima.h>
>
> #define SLAVE_CODE_SIZE 256 /* First 0x100 bytes */
>
> @@ -110,38 +109,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code,
> return 0;
> }
>
> -/**
> - * delete_fdt_mem_rsv - delete memory reservation with given address and size
> - *
> - * Return: 0 on success, or negative errno on error.
> - */
> -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size)
> -{
> - int i, ret, num_rsvs = fdt_num_mem_rsv(fdt);
> -
> - for (i = 0; i < num_rsvs; i++) {
> - uint64_t rsv_start, rsv_size;
> -
> - ret = fdt_get_mem_rsv(fdt, i, &rsv_start, &rsv_size);
> - if (ret) {
> - pr_err("Malformed device tree.\n");
> - return -EINVAL;
> - }
> -
> - if (rsv_start == start && rsv_size == size) {
> - ret = fdt_del_mem_rsv(fdt, i);
> - if (ret) {
> - pr_err("Error deleting device tree reservation.\n");
> - return -EINVAL;
> - }
> -
> - return 0;
> - }
> - }
> -
> - return -ENOENT;
> -}
> -
> /*
> * setup_new_fdt - modify /chosen and memory reservation for the next kernel
> * @image: kexec image being loaded.
> @@ -163,12 +130,6 @@ int setup_new_fdt(const struct kimage *image, void *fdt,
> if (ret)
> goto err;
>
> - ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen"));
> - if (ret) {
> - pr_err("Error setting up the new device tree.\n");
> - return ret;
> - }
> -
> return 0;
>
> err:
> diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
> deleted file mode 100644
> index d579d3da4715..000000000000
> --- a/arch/powerpc/kexec/ima.c
> +++ /dev/null
> @@ -1,182 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * Copyright (C) 2016 IBM Corporation
> - *
> - * Authors:
> - * Thiago Jung Bauermann <bauerman at linux.vnet.ibm.com>
> - */
> -
> -#include <linux/slab.h>
> -#include <linux/kexec.h>
> -#include <linux/of.h>
> -#include <linux/memblock.h>
> -#include <linux/libfdt.h>
> -#include <asm/ima.h>
> -
> -static int get_addr_size_cells(int *addr_cells, int *size_cells)
> -{
> - struct device_node *root;
> -
> - root = of_find_node_by_path("/");
> - if (!root)
> - return -EINVAL;
> -
> - *addr_cells = of_n_addr_cells(root);
> - *size_cells = of_n_size_cells(root);
> -
> - of_node_put(root);
> -
> - return 0;
> -}
> -
> -static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
> - size_t *size)
> -{
> - int ret, addr_cells, size_cells;
> -
> - ret = get_addr_size_cells(&addr_cells, &size_cells);
> - if (ret)
> - return ret;
> -
> - if (len < 4 * (addr_cells + size_cells))
> - return -ENOENT;
> -
> - *addr = of_read_number(prop, addr_cells);
> - *size = of_read_number(prop + 4 * addr_cells, size_cells);
> -
> - return 0;
> -}
> -
> -/**
> - * ima_get_kexec_buffer - get IMA buffer from the previous kernel
> - * @addr: On successful return, set to point to the buffer contents.
> - * @size: On successful return, set to the buffer size.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int ima_get_kexec_buffer(void **addr, size_t *size)
> -{
> - int ret, len;
> - unsigned long tmp_addr;
> - size_t tmp_size;
> - const void *prop;
> -
> - prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len);
> - if (!prop)
> - return -ENOENT;
> -
> - ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size);
> - if (ret)
> - return ret;
> -
> - *addr = __va(tmp_addr);
> - *size = tmp_size;
> -
> - return 0;
> -}
> -
> -/**
> - * ima_free_kexec_buffer - free memory used by the IMA buffer
> - */
> -int ima_free_kexec_buffer(void)
> -{
> - int ret;
> - unsigned long addr;
> - size_t size;
> - struct property *prop;
> -
> - prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL);
> - if (!prop)
> - return -ENOENT;
> -
> - ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size);
> - if (ret)
> - return ret;
> -
> - ret = of_remove_property(of_chosen, prop);
> - if (ret)
> - return ret;
> -
> - return memblock_free(addr, size);
> -
> -}
> -
> -/**
> - * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
> - *
> - * The IMA measurement buffer is of no use to a subsequent kernel, so we always
> - * remove it from the device tree.
> - */
> -void remove_ima_buffer(void *fdt, int chosen_node)
> -{
> - int ret, len;
> - unsigned long addr;
> - size_t size;
> - const void *prop;
> -
> - prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len);
> - if (!prop)
> - return;
> -
> - ret = do_get_kexec_buffer(prop, len, &addr, &size);
> - fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer");
> - if (ret)
> - return;
> -
> - ret = delete_fdt_mem_rsv(fdt, addr, size);
> - if (!ret)
> - pr_debug("Removed old IMA buffer reservation.\n");
> -}
> -
> -#ifdef CONFIG_IMA_KEXEC
> -/**
> - * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
> - *
> - * Architectures should use this function to pass on the IMA buffer
> - * information to the next kernel.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
> - size_t size)
> -{
> - image->arch.ima_buffer_addr = load_addr;
> - image->arch.ima_buffer_size = size;
> -
> - return 0;
> -}
> -
> -/**
> - * setup_ima_buffer - add IMA buffer information to the fdt
> - * @image: kexec image being loaded.
> - * @fdt: Flattened device tree for the next kernel.
> - * @chosen_node: Offset to the chosen node.
> - *
> - * Return: 0 on success, or negative errno on error.
> - */
> -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
> -{
> - int ret;
> -
> - remove_ima_buffer(fdt, chosen_node);
> - if (!image->arch.ima_buffer_size)
> - return 0;
> -
> - ret = fdt_appendprop_addrrange(fdt, 0, chosen_node,
> - "linux,ima-kexec-buffer",
> - image->arch.ima_buffer_addr,
> - image->arch.ima_buffer_size);
> - if (ret)
> - return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL);
> -
> - ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr,
> - image->arch.ima_buffer_size);
> - if (ret)
> - return -EINVAL;
> -
> - pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n",
> - image->arch.ima_buffer_addr, image->arch.ima_buffer_size);
> -
> - return 0;
> -}
> -#endif /* CONFIG_IMA_KEXEC */
> diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
> index 66787be081fe..a6ab35f16dd2 100644
> --- a/drivers/of/kexec.c
> +++ b/drivers/of/kexec.c
> @@ -10,10 +10,12 @@
> */
>
> #include <linux/kernel.h>
> +#include <linux/slab.h>
> #include <linux/kexec.h>
> #include <linux/libfdt.h>
> #include <linux/of.h>
> #include <linux/of_fdt.h>
> +#include <linux/memblock.h>
> #include <linux/random.h>
> #include <linux/types.h>
>
> @@ -59,6 +61,141 @@ static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned lon
> return -ENOENT;
> }
>
> +/**
> + * get_addr_size_cells - Get address and size of root node
> + *
> + * @addr_cells: Return address of the root node
> + * @size_cells: Return size of the root node
> + *
> + * Return: 0 on success, or negative errno on error.
> + */
> +static int get_addr_size_cells(int *addr_cells, int *size_cells)
> +{
> + struct device_node *root;
> +
> + root = of_find_node_by_path("/");
> + if (!root)
> + return -EINVAL;
> +
> + *addr_cells = of_n_addr_cells(root);
> + *size_cells = of_n_size_cells(root);
> +
> + of_node_put(root);
> +
> + return 0;
> +}
> +
> +/**
> + * do_get_kexec_buffer - Get address and size of device tree property
> + *
> + * @prop: Device tree property
> + * @len: Size of @prop
> + * @addr: Return address of the node
> + * @size: Return size of the node
> + *
> + * Return: 0 on success, or negative errno on error.
> + */
> +static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
> + size_t *size)
> +{
> + int ret, addr_cells, size_cells;
> +
> + ret = get_addr_size_cells(&addr_cells, &size_cells);
> + if (ret)
> + return ret;
> +
> + if (len < 4 * (addr_cells + size_cells))
> + return -ENOENT;
> +
> + *addr = of_read_number(prop, addr_cells);
> + *size = of_read_number(prop + 4 * addr_cells, size_cells);
> +
> + return 0;
> +}
> +
> +/**
> + * ima_get_kexec_buffer - get IMA buffer from the previous kernel
> + * @addr: On successful return, set to point to the buffer contents.
> + * @size: On successful return, set to the buffer size.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int ima_get_kexec_buffer(void **addr, size_t *size)
> +{
> + int ret, len;
> + unsigned long tmp_addr;
> + size_t tmp_size;
> + const void *prop;
> +
> + prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len);
> + if (!prop)
> + return -ENOENT;
> +
> + ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size);
> + if (ret)
> + return ret;
> +
> + *addr = __va(tmp_addr);
> + *size = tmp_size;
> +
> + return 0;
> +}
> +
> +/**
> + * ima_free_kexec_buffer - free memory used by the IMA buffer
> + */
> +int ima_free_kexec_buffer(void)
> +{
> + int ret;
> + unsigned long addr;
> + size_t size;
> + struct property *prop;
> +
> + prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL);
> + if (!prop)
> + return -ENOENT;
> +
> + ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size);
> + if (ret)
> + return ret;
> +
> + ret = of_remove_property(of_chosen, prop);
> + if (ret)
> + return ret;
> +
> + return memblock_free(addr, size);
> +}
> +
> +/**
> + * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
> + *
> + * @fdt: Flattened Device Tree to update
> + * @chosen_node: Offset to the chosen node in the device tree
> + *
> + * The IMA measurement buffer is of no use to a subsequent kernel, so we always
> + * remove it from the device tree.
> + */
> +void remove_ima_buffer(void *fdt, int chosen_node)
static
> +{
> + int ret, len;
> + unsigned long addr;
> + size_t size;
> + const void *prop;
> +
> + prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len);
> + if (!prop)
> + return;
> +
> + ret = do_get_kexec_buffer(prop, len, &addr, &size);
> + fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer");
> + if (ret)
> + return;
> +
> + ret = fdt_find_and_del_mem_rsv(fdt, addr, size);
> + if (!ret)
> + pr_debug("Removed old IMA buffer reservation.\n");
> +}
All the above needs to be in an '#ifdef CONFIG_IMA_KEXEC'.
> +
> /*
> * of_kexec_setup_new_fdt - modify /chosen and memory reservation for the next kernel
> *
> @@ -219,6 +356,10 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt,
> }
>
> ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0);
> + if (ret)
> + goto out;
> +
> + ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen"));
>
> out:
> if (ret)
> @@ -226,3 +367,60 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt,
>
> return 0;
> }
> +
> +#ifdef CONFIG_IMA_KEXEC
> +/**
> + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
> + *
> + * @image: kimage struct to set IMA buffer data
> + * @load_addr: Starting address where IMA buffer is loaded at
> + * @size: Number of bytes in the IMA buffer
> + *
> + * Architectures should use this function to pass on the IMA buffer
> + * information to the next kernel.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
> + size_t size)
This should be a static inline in asm/kexec.h.
> +{
> + image->arch.ima_buffer_addr = load_addr;
> + image->arch.ima_buffer_size = size;
> +
> + return 0;
> +}
> +
> +/**
> + * setup_ima_buffer - add IMA buffer information to the fdt
> + * @image: kexec image being loaded.
> + * @fdt: Flattened device tree for the next kernel.
> + * @chosen_node: Offset to the chosen node.
> + *
> + * Return: 0 on success, or negative errno on error.
> + */
> +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
static
> +{
> + int ret;
> +
> + remove_ima_buffer(fdt, chosen_node);
> + if (!image->arch.ima_buffer_size)
> + return 0;
> +
> + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node,
> + "linux,ima-kexec-buffer",
> + image->arch.ima_buffer_addr,
> + image->arch.ima_buffer_size);
> + if (ret)
> + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL);
> +
> + ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr,
> + image->arch.ima_buffer_size);
> + if (ret)
> + return -EINVAL;
> +
> + pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n",
> + image->arch.ima_buffer_addr, image->arch.ima_buffer_size);
> +
> + return 0;
> +}
> +#endif /* CONFIG_IMA_KEXEC */
> diff --git a/include/linux/of.h b/include/linux/of.h
> index 3375f5295875..7477f2266d8f 100644
> --- a/include/linux/of.h
> +++ b/include/linux/of.h
> @@ -562,6 +562,23 @@ struct kimage;
> int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt,
> unsigned long initrd_load_addr, unsigned long initrd_len,
> const char *cmdline);
> +int ima_get_kexec_buffer(void **addr, size_t *size);
> +int ima_free_kexec_buffer(void);
> +void remove_ima_buffer(void *fdt, int chosen_node);
> +
> +#ifdef CONFIG_IMA_KEXEC
> +int arch_ima_add_kexec_buffer(struct kimage *image,
> + unsigned long load_addr,
> + size_t size);
> +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
This doesn't need to be public.
> +#else
> +static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
> + int chosen_node)
> +{
> + remove_ima_buffer(fdt, chosen_node);
> + return 0;
> +}
> +#endif /* CONFIG_IMA_KEXEC */
>
> #else /* CONFIG_OF */
>
> diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
> index 6ebefec616e4..7c3947ad3773 100644
> --- a/security/integrity/ima/ima.h
> +++ b/security/integrity/ima/ima.h
> @@ -24,10 +24,6 @@
>
> #include "../integrity.h"
>
> -#ifdef CONFIG_HAVE_IMA_KEXEC
> -#include <asm/ima.h>
> -#endif
> -
> enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN,
> IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII };
> enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 };
> diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c
> index 121de3e04af2..3d6a8820e2a5 100644
> --- a/security/integrity/ima/ima_kexec.c
> +++ b/security/integrity/ima/ima_kexec.c
> @@ -9,7 +9,9 @@
>
> #include <linux/seq_file.h>
> #include <linux/vmalloc.h>
> +#include <linux/of.h>
> #include <linux/kexec.h>
> +#include <linux/ima.h>
> #include "ima.h"
>
> #ifdef CONFIG_IMA_KEXEC
> --
> 2.29.2
>
More information about the linux-arm-kernel
mailing list