[PATCH 2/3] usb: xhci-mtk: fix UAS issue by XHCI_BROKEN_STREAMS quirk

Chunfeng Yun chunfeng.yun at mediatek.com
Thu Dec 17 01:23:50 EST 2020


On Thu, 2020-12-17 at 11:32 +0800, Nicolas Boichat wrote:
> On Thu, Dec 17, 2020 at 10:19 AM Chunfeng Yun <chunfeng.yun at mediatek.com> wrote:
> >
> > On Wed, 2020-12-16 at 20:28 +0800, Nicolas Boichat wrote:
> > > On Wed, Dec 16, 2020 at 7:53 PM Chunfeng Yun <chunfeng.yun at mediatek.com> wrote:
> > > >
> > > > The 0.96 xHCI controller on some platforms does not support
> > > > bulk stream even HCCPARAMS says supporting, due to MaxPSASize
> > > > is set a non-zero default value by mistake, here use
> > > > XHCI_BROKEN_STREAMS quirk to fix it.
> > > >
> > > > Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd")
> > > > Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> > > > ---
> > > >  drivers/usb/host/xhci-mtk.c | 7 ++++++-
> > > >  drivers/usb/host/xhci-mtk.h | 1 +
> > > >  2 files changed, 7 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> > > > index 8f321f39ab96..08dab974d847 100644
> > > > --- a/drivers/usb/host/xhci-mtk.c
> > > > +++ b/drivers/usb/host/xhci-mtk.c
> > > > @@ -395,6 +395,9 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
> > > >         xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
> > > >         if (mtk->lpm_support)
> > > >                 xhci->quirks |= XHCI_LPM_SUPPORT;
> > > > +
> > > > +       if (mtk->broken_streams)
> > > > +               xhci->quirks |= XHCI_BROKEN_STREAMS;
> > > >  }
> > > >
> > > >  /* called during probe() after chip reset completes */
> > > > @@ -460,6 +463,8 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> > > >                 return ret;
> > > >
> > > >         mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
> > > > +       mtk->broken_streams =
> > > > +               of_property_read_bool(node, "mediatek,broken_streams_quirk");
> > >
> > > Would it be better to add a data field to struct of_device_id
> > > mtk_xhci_of_match, and enable this quirk on mediatek,mt8173-xhci only?
> > This is the common issue for all SoCs (before 2016.06) with 0.96 xHCI
> > when the controller don't support bulk stream. If enable this quirk only
> > for mt8173, then for other SoCs, the compatible need include
> > "mediatek,mt8173-xhci" in dts, this may be not flexible for some cases,
> > e.g. a new SoC has the broken stream as mt8173, but also has another
> > different quirk, the way you suggested will not handle it.
> 
> It can, we do this regularly for many other components. One example:
> https://elixir.bootlin.com/linux/latest/source/drivers/i2c/busses/i2c-mt65xx.c#L402
> 
Got it. Indeed works when add compatible private data.

Due to many SoCs supports USB and not upstream, I'd prefer to avoid
adding new compatible in driver when support new SoCs, and leave the
code as simple as possible.

> > And I plan to remove "mediatek,mt8173-xhci" in mtk_xhci_of_match after
> > converting the binding to YMAL.
> >
> > >
> > > (IMHO usb3-lpm-capable detection should also be done in the same way)
> > I prefer to provide a property for common issues, and use the way you
> > suggested for the issue only happened at a specific SoC.
> 
> Understand, it's just different approaches, 
Yes

> there seems to be
> precedent (at least in this driver/binding) for using properties, so
> I'll let the USB maintainers speak up ,-)
> 
> >
> > Thank you
> >
> > >
> > > Thanks,
> > >
> > > >         /* optional property, ignore the error if it does not exist */
> > > >         of_property_read_u32(node, "mediatek,u3p-dis-msk",
> > > >                              &mtk->u3p_dis_msk);
> > > > @@ -546,7 +551,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> > > >         if (ret)
> > > >                 goto put_usb3_hcd;
> > > >
> > > > -       if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
> > > > +       if (!mtk->broken_streams && HCC_MAX_PSA(xhci->hcc_params) >= 4)
> > > >                 xhci->shared_hcd->can_do_streams = 1;
> > > >
> > > >         ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
> > > > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
> > > > index a93cfe817904..86aa4978915e 100644
> > > > --- a/drivers/usb/host/xhci-mtk.h
> > > > +++ b/drivers/usb/host/xhci-mtk.h
> > > > @@ -147,6 +147,7 @@ struct xhci_hcd_mtk {
> > > >         struct phy **phys;
> > > >         int num_phys;
> > > >         bool lpm_support;
> > > > +       bool broken_streams;
> > > >         /* usb remote wakeup */
> > > >         bool uwk_en;
> > > >         struct regmap *uwk;
> > > > --
> > > > 2.18.0
> >



More information about the linux-arm-kernel mailing list