[PATCH v2] driver: aspeed: g6: Fix PWMG0 pinctrl setting

Billy Tsai billy_tsai at aspeedtech.com
Wed Dec 16 21:38:26 EST 2020


Hi Andrew,

Best Regards,
Billy Tsai

On 2020/12/17, 8:38 AM, Andrew Jeffery wrote:

    > The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
    > SCU414 to SCU4B4.
    > Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits
    > at the same time.
    
    FYI, we don't need to explicitly clear SCU414[...] as part of the PWM mux 
    configuration as the these bits are cleared as part of disabling the SD1* 
    signal state on each pin[1]. You should be able to confirm this by compiling 
    with CONFIG_DEBUG_PINCTRL=y and "debug" on the kernel commandline.
    
    That said, it would be neat if we had some kunit tests to exercise all this, 
    but it's not something I've thought deeply about.

Thanks for your remainder. I will send v3 to just fix the copy/paste error.

    [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pinctrl/aspeed/pinctrl-aspeed.c?h=v5.10#n248
    
    >
    > Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
    >
    > Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
    > ---
    >  drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 24 ++++++++++++++--------
    >  1 file changed, 16 insertions(+), 8 deletions(-)
    >
    > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > index b673a44ffa3b..1dfb12a5b2ce 100644
    > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > @@ -367,49 +367,57 @@ FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
    >
    >  #define D22 40
    >  SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
    > -SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8));
    > +SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8),
    
    Good catch, looks like a copy/paste fail on my part :)
    
    > +SIG_DESC_CLEAR(SCU414, 8));
    
    As above, this should be unnecessary.
    
    Can you confirm and remove the CLEAR()s for v3?
    
    Cheers,
    
    Andrew
    
    >  PIN_DECL_2(D22, GPIOF0, SD1CLK, PWM8);
    >  GROUP_DECL(PWM8G0, D22);
    >
    >  #define E22 41
    >  SIG_EXPR_LIST_DECL_SESG(E22, SD1CMD, SD1, SIG_DESC_SET(SCU414, 9));
    > -SIG_EXPR_LIST_DECL_SEMG(E22, PWM9, PWM9G0, PWM9, SIG_DESC_SET(SCU4B4, 9));
    > +SIG_EXPR_LIST_DECL_SEMG(E22, PWM9, PWM9G0, PWM9, SIG_DESC_SET(SCU4B4, 9),
    > +SIG_DESC_CLEAR(SCU414, 9));
    >  PIN_DECL_2(E22, GPIOF1, SD1CMD, PWM9);
    >  GROUP_DECL(PWM9G0, E22);
    >
    >  #define D23 42
    >  SIG_EXPR_LIST_DECL_SESG(D23, SD1DAT0, SD1, SIG_DESC_SET(SCU414, 10));
    > -SIG_EXPR_LIST_DECL_SEMG(D23, PWM10, PWM10G0, PWM10, SIG_DESC_SET(SCU4B4, 10));
    > +SIG_EXPR_LIST_DECL_SEMG(D23, PWM10, PWM10G0, PWM10, SIG_DESC_SET(SCU4B4, 10),
    > +SIG_DESC_CLEAR(SCU414, 10));
    >  PIN_DECL_2(D23, GPIOF2, SD1DAT0, PWM10);
    >  GROUP_DECL(PWM10G0, D23);
    >
    >  #define C23 43
    >  SIG_EXPR_LIST_DECL_SESG(C23, SD1DAT1, SD1, SIG_DESC_SET(SCU414, 11));
    > -SIG_EXPR_LIST_DECL_SEMG(C23, PWM11, PWM11G0, PWM11, SIG_DESC_SET(SCU4B4, 11));
    > +SIG_EXPR_LIST_DECL_SEMG(C23, PWM11, PWM11G0, PWM11, SIG_DESC_SET(SCU4B4, 11),
    > +SIG_DESC_CLEAR(SCU414, 11));
    >  PIN_DECL_2(C23, GPIOF3, SD1DAT1, PWM11);
    >  GROUP_DECL(PWM11G0, C23);
    >
    >  #define C22 44
    >  SIG_EXPR_LIST_DECL_SESG(C22, SD1DAT2, SD1, SIG_DESC_SET(SCU414, 12));
    > -SIG_EXPR_LIST_DECL_SEMG(C22, PWM12, PWM12G0, PWM12, SIG_DESC_SET(SCU4B4, 12));
    > +SIG_EXPR_LIST_DECL_SEMG(C22, PWM12, PWM12G0, PWM12, SIG_DESC_SET(SCU4B4, 12),
    > +SIG_DESC_CLEAR(SCU414, 12));
    >  PIN_DECL_2(C22, GPIOF4, SD1DAT2, PWM12);
    >  GROUP_DECL(PWM12G0, C22);
    >
    >  #define A25 45
    >  SIG_EXPR_LIST_DECL_SESG(A25, SD1DAT3, SD1, SIG_DESC_SET(SCU414, 13));
    > -SIG_EXPR_LIST_DECL_SEMG(A25, PWM13, PWM13G0, PWM13, SIG_DESC_SET(SCU4B4, 13));
    > +SIG_EXPR_LIST_DECL_SEMG(A25, PWM13, PWM13G0, PWM13, SIG_DESC_SET(SCU4B4, 13),
    > +SIG_DESC_CLEAR(SCU414, 13));
    >  PIN_DECL_2(A25, GPIOF5, SD1DAT3, PWM13);
    >  GROUP_DECL(PWM13G0, A25);
    >
    >  #define A24 46
    >  SIG_EXPR_LIST_DECL_SESG(A24, SD1CD, SD1, SIG_DESC_SET(SCU414, 14));
    > -SIG_EXPR_LIST_DECL_SEMG(A24, PWM14, PWM14G0, PWM14, SIG_DESC_SET(SCU4B4, 14));
    > +SIG_EXPR_LIST_DECL_SEMG(A24, PWM14, PWM14G0, PWM14, SIG_DESC_SET(SCU4B4, 14),
    > +SIG_DESC_CLEAR(SCU414, 14));
    >  PIN_DECL_2(A24, GPIOF6, SD1CD, PWM14);
    >  GROUP_DECL(PWM14G0, A24);
    >
    >  #define A23 47
    >  SIG_EXPR_LIST_DECL_SESG(A23, SD1WP, SD1, SIG_DESC_SET(SCU414, 15));
    > -SIG_EXPR_LIST_DECL_SEMG(A23, PWM15, PWM15G0, PWM15, SIG_DESC_SET(SCU4B4, 15));
    > +SIG_EXPR_LIST_DECL_SEMG(A23, PWM15, PWM15G0, PWM15, SIG_DESC_SET(SCU4B4, 15),
    > +SIG_DESC_CLEAR(SCU414, 15));
    >  PIN_DECL_2(A23, GPIOF7, SD1WP, PWM15);
    >  GROUP_DECL(PWM15G0, A23);
    >
    > --
    > 2.17.1
    



More information about the linux-arm-kernel mailing list