[PATCH v7 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID

Krzysztof Kozlowski krzk at kernel.org
Wed Dec 16 07:47:02 EST 2020


On Wed, Dec 16, 2020 at 09:55:34AM +0000, Alice Guo (OSS) wrote:
> 
> 
> > -----Original Message-----
> > From: Krzysztof Kozlowski <krzk at kernel.org>
> > Sent: 2020年12月15日 17:11
> > To: Alice Guo (OSS) <alice.guo at oss.nxp.com>
> > Cc: robh+dt at kernel.org; shawnguo at kernel.org; s.hauer at pengutronix.de;
> > kernel at pengutronix.de; festevam at gmail.com; devicetree at vger.kernel.org;
> > linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; dl-linux-imx
> > <linux-imx at nxp.com>
> > Subject: Re: [PATCH v7 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc
> > unique ID
> > 
> > On Tue, Dec 15, 2020 at 04:35:48PM +0800, Alice Guo (OSS) wrote:
> > > From: Alice Guo <alice.guo at nxp.com>
> > >
> > > Add DT Binding doc for the Unique ID of i.MX 8M series.
> > >
> > > Signed-off-by: Alice Guo <alice.guo at nxp.com>
> > > ---
> > >
> > > Changes for v7:
> > >  - change to a separate schema file
> > > Changes for v6:
> > >  - none
> > > Changes for v5:
> > >  - correct the error of using allOf
> > > Changes for v4:
> > >  - use allOf to limit new version DTS files for i.MX8M to include
> > >    "fsl,imx8m*-soc", nvmem-cells and nvmem-cells-names Changes for v3:
> > >  - put it into Documentation/devicetree/bindings/arm/fsl.yaml
> > >  - modify the description of nvmem-cells
> > >  - use "make ARCH=arm64 dtbs_check" to make sure it is right Changes
> > > for v2:
> > >  - remove the subject prefix "LF-2571-1"
> > >
> > >  .../bindings/soc/imx/imx8m-soc.yaml           | 54
> > +++++++++++++++++++
> > >  1 file changed, 54 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> > > b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> > > new file mode 100644
> > > index 000000000000..a2f7dc0c9b35
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> > > @@ -0,0 +1,54 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: NXP i.MX8M Series SoC
> > > +
> > > +maintainers:
> > > +  - Alice Guo <alice.guo at nxp.com>
> > > +
> > > +description: |
> > > +  NXP i.MX8M series SoCs contain fuse entries from which SoC Unique
> > > +ID can be
> > > +  obtained.
> > > +
> > > +select:
> > 
> > Mhm, there are other compatibles here so indeed, select is needed.
> > 
> > > +  properties:
> > > +    compatible:
> > > +      contains:
> > > +        enum:
> > > +          - fsl,imx8mm
> > > +          - fsl,imx8mn
> > > +          - fsl,imx8mp
> > > +          - fsl,imx8mq
> > > +  required:
> > > +    - compatible
> > 
> > This does not work - does not match anything. It seems you missed proper
> > "required" for the matched node.
> > 
> > Provide also an example.
> > 
> > Best regards,
> > Krzysztof
> > 
> 
> Hi, Krzysztof
> Thank you for your advice. My opinion is different from yours.
> 
> I did the fowllowing test:
> --- a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> @@ -22,6 +22,7 @@ select:
>            - fsl,imx8mn
>            - fsl,imx8mp
>            - fsl,imx8mq
> +          - fsl,lx2160a
>    required:
>      - compatible
> 
> ➜  linux-next git:(master) ✗ make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> ...
> /home/nxf55104/virtualization/upstream/linux-next/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dt.yaml: /: soc:compatible:0: 'simple-bus' is not one of ['fsl,imx8mm-soc', 'fsl,imx8mn-soc', 'fsl,imx8mp-soc', 'fsl,imx8mq-soc']
>         From schema: /home/nxf55104/virtualization/upstream/linux-next/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
> ...
> 
> So, I think it works and can match stuff. I do not understand what proper " required" I missed. Please give me some tips. Thank you.

I applied the bindings (only) and run dtbs_check - everything passed
fine but it shouldn't. The DTS do not have soc compatibles.

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list