[PATCH 3/6] ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration

[Nicolas Saenz Julienne]

RPi4's co-processor will copy the board's bootloader configuration into
memory for the OS to consume. Introduce a reserved-memory area template
for the co-processor to edit before booting the system so as for Linux
not to overwrite that memory.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 403bacf986eb..c58e58e8ce39 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -25,6 +25,7 @@ aliases {
 		emmc2bus = &emmc2bus;
 		ethernet0 = &genet;
 		pcie0 = &pcie0;
+		eeprom = &eeprom;
 	};
 
 	leds {
@@ -218,6 +219,19 @@ &pwm1 {
 	status = "okay";
 };
 
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	eeprom: eeprom at 0 {
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
 /* SDHCI is used to control the SDIO for wireless */
 &sdhci {
 	#address-cells = <1>;
-- 
2.29.2