[PATCH 1/6] dt-bindings: nvmem: Add bindings for rmem driver

[Nicolas Saenz Julienne]

Firmware/co-processors might use reserved memory areas in order to pass
data stemming from an nvmem device otherwise non accessible to Linux.
For example an EEPROM memory only physically accessible to firmware, or
data only accessible early at boot time.

Introduce the dt-bindings to nvmem's rmem.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
---
 .../devicetree/bindings/nvmem/rmem.yaml       | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/rmem.yaml

diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml
new file mode 100644
index 000000000000..3037ebc4634d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reserved Memory Based nvmem Device
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
+
+properties:
+  compatible:
+    enum:
+      - nvmem-rmem
+
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the reserved memory region
+
+required:
+  - compatible
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+        fw-config {
+                compatible = "nvmem-rmem";
+                memory-region = <&mem>;
+        };
+
+...
-- 
2.29.2