[PATCH v6 9/9] drm/vc4: hdmi: Enable 10/12 bpc output
Dave Stevenson
dave.stevenson at raspberrypi.com
Tue Dec 15 06:04:20 EST 2020
Hi Maxime
On Thu, 10 Dec 2020 at 14:23, Maxime Ripard <maxime at cerno.tech> wrote:
>
> The BCM2711 supports higher bpc count than just 8, so let's support it in
> our driver.
>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
Looks good to me, but is impacted by the comment I've just made on 5/9.
Dave
> ---
> drivers/gpu/drm/vc4/vc4_hdmi.c | 71 ++++++++++++++++++++++++++++-
> drivers/gpu/drm/vc4/vc4_hdmi.h | 1 +
> drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 9 ++++
> 3 files changed, 80 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 996c727278fb..e9796120e991 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -76,6 +76,17 @@
> #define VC5_HDMI_VERTB_VSPO_SHIFT 16
> #define VC5_HDMI_VERTB_VSPO_MASK VC4_MASK(29, 16)
>
> +#define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_SHIFT 8
> +#define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_MASK VC4_MASK(10, 8)
> +
> +#define VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH_SHIFT 0
> +#define VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH_MASK VC4_MASK(3, 0)
> +
> +#define VC5_HDMI_GCP_CONFIG_GCP_ENABLE BIT(31)
> +
> +#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_SHIFT 8
> +#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_MASK VC4_MASK(15, 8)
> +
> # define VC4_HD_M_SW_RST BIT(2)
> # define VC4_HD_M_ENABLE BIT(0)
>
> @@ -185,6 +196,9 @@ static void vc4_hdmi_connector_reset(struct drm_connector *connector)
> if (!new_state)
> return;
>
> + new_state->base.max_bpc = 8;
> + new_state->base.max_requested_bpc = 8;
> +
> __drm_atomic_helper_connector_reset(connector, &new_state->base);
> drm_atomic_helper_connector_tv_reset(connector);
> }
> @@ -232,12 +246,20 @@ static int vc4_hdmi_connector_init(struct drm_device *dev,
> vc4_hdmi->ddc);
> drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs);
>
> + /*
> + * Some of the properties below require access to state, like bpc.
> + * Allocate some default initial connector state with our reset helper.
> + */
> + if (connector->funcs->reset)
> + connector->funcs->reset(connector);
> +
> /* Create and attach TV margin props to this connector. */
> ret = drm_mode_create_tv_margin_properties(dev);
> if (ret)
> return ret;
>
> drm_connector_attach_tv_margin_properties(connector);
> + drm_connector_attach_max_bpc_property(connector, 8, 12);
>
> connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
> DRM_CONNECTOR_POLL_DISCONNECT);
> @@ -503,6 +525,7 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
> }
>
> static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
> + struct drm_connector_state *state,
> struct drm_display_mode *mode)
> {
> bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
> @@ -546,7 +569,9 @@ static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
> HDMI_WRITE(HDMI_VERTB0, vertb_even);
> HDMI_WRITE(HDMI_VERTB1, vertb);
> }
> +
> static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
> + struct drm_connector_state *state,
> struct drm_display_mode *mode)
> {
> bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
> @@ -566,6 +591,9 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
> mode->crtc_vsync_end -
> interlaced,
> VC4_HDMI_VERTB_VBP));
> + unsigned char gcp;
> + bool gcp_en;
> + u32 reg;
>
> HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021);
> HDMI_WRITE(HDMI_HORZA,
> @@ -591,6 +619,39 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
> HDMI_WRITE(HDMI_VERTB0, vertb_even);
> HDMI_WRITE(HDMI_VERTB1, vertb);
>
> + switch (state->max_bpc) {
> + case 12:
> + gcp = 6;
> + gcp_en = true;
> + break;
> + case 10:
> + gcp = 5;
> + gcp_en = true;
> + break;
> + case 8:
> + default:
> + gcp = 4;
> + gcp_en = false;
> + break;
> + }
> +
> + reg = HDMI_READ(HDMI_DEEP_COLOR_CONFIG_1);
> + reg &= ~(VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_MASK |
> + VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH_MASK);
> + reg |= VC4_SET_FIELD(2, VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE) |
> + VC4_SET_FIELD(gcp, VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH);
> + HDMI_WRITE(HDMI_DEEP_COLOR_CONFIG_1, reg);
> +
> + reg = HDMI_READ(HDMI_GCP_WORD_1);
> + reg &= ~VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_MASK;
> + reg |= VC4_SET_FIELD(gcp, VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1);
> + HDMI_WRITE(HDMI_GCP_WORD_1, reg);
> +
> + reg = HDMI_READ(HDMI_GCP_CONFIG);
> + reg &= ~VC5_HDMI_GCP_CONFIG_GCP_ENABLE;
> + reg |= gcp_en ? VC5_HDMI_GCP_CONFIG_GCP_ENABLE : 0;
> + HDMI_WRITE(HDMI_GCP_CONFIG, reg);
> +
> HDMI_WRITE(HDMI_CLOCK_STOP, 0);
> }
>
> @@ -728,7 +789,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
> VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS);
>
> if (vc4_hdmi->variant->set_timings)
> - vc4_hdmi->variant->set_timings(vc4_hdmi, mode);
> + vc4_hdmi->variant->set_timings(vc4_hdmi, conn_state, mode);
> }
>
> static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
> @@ -849,6 +910,14 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
> pixel_rate = mode->clock * 1000;
> }
>
> + if (conn_state->max_bpc == 12) {
> + pixel_rate = pixel_rate * 150;
> + do_div(pixel_rate, 100);
> + } else if (conn_state->max_bpc == 10) {
> + pixel_rate = pixel_rate * 125;
> + do_div(pixel_rate, 100);
> + }
> +
> if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> pixel_rate = pixel_rate * 2;
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
> index 60c53d7c9bad..4c8994cfd932 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.h
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
> @@ -77,6 +77,7 @@ struct vc4_hdmi_variant {
>
> /* Callback to configure the video timings in the HDMI block */
> void (*set_timings)(struct vc4_hdmi *vc4_hdmi,
> + struct drm_connector_state *state,
> struct drm_display_mode *mode);
>
> /* Callback to initialize the PHY according to the connector state */
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_regs.h b/drivers/gpu/drm/vc4/vc4_hdmi_regs.h
> index 7c6b4818f245..013fd57febd8 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi_regs.h
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi_regs.h
> @@ -59,9 +59,12 @@ enum vc4_hdmi_field {
> */
> HDMI_CTS_0,
> HDMI_CTS_1,
> + HDMI_DEEP_COLOR_CONFIG_1,
> HDMI_DVP_CTL,
> HDMI_FIFO_CTL,
> HDMI_FRAME_COUNT,
> + HDMI_GCP_CONFIG,
> + HDMI_GCP_WORD_1,
> HDMI_HORZA,
> HDMI_HORZB,
> HDMI_HOTPLUG,
> @@ -229,6 +232,9 @@ static const struct vc4_hdmi_register vc5_hdmi_hdmi0_fields[] = {
> VC4_HDMI_REG(HDMI_VERTB1, 0x0f8),
> VC4_HDMI_REG(HDMI_MAI_CHANNEL_MAP, 0x09c),
> VC4_HDMI_REG(HDMI_MAI_CONFIG, 0x0a0),
> + VC4_HDMI_REG(HDMI_DEEP_COLOR_CONFIG_1, 0x170),
> + VC4_HDMI_REG(HDMI_GCP_CONFIG, 0x178),
> + VC4_HDMI_REG(HDMI_GCP_WORD_1, 0x17c),
> VC4_HDMI_REG(HDMI_HOTPLUG, 0x1a8),
>
> VC5_DVP_REG(HDMI_CLOCK_STOP, 0x0bc),
> @@ -305,6 +311,9 @@ static const struct vc4_hdmi_register vc5_hdmi_hdmi1_fields[] = {
> VC4_HDMI_REG(HDMI_VERTB1, 0x0f8),
> VC4_HDMI_REG(HDMI_MAI_CHANNEL_MAP, 0x09c),
> VC4_HDMI_REG(HDMI_MAI_CONFIG, 0x0a0),
> + VC4_HDMI_REG(HDMI_DEEP_COLOR_CONFIG_1, 0x170),
> + VC4_HDMI_REG(HDMI_GCP_CONFIG, 0x178),
> + VC4_HDMI_REG(HDMI_GCP_WORD_1, 0x17c),
> VC4_HDMI_REG(HDMI_HOTPLUG, 0x1a8),
>
> VC5_DVP_REG(HDMI_CLOCK_STOP, 0x0bc),
> --
> 2.28.0
>
More information about the linux-arm-kernel
mailing list