[PATCH v11 6/8] powerpc: Move arch_ima_add_kexec_buffer to ima

[Lakshmi Ramasubramanian]

arch_ima_add_kexec_buffer() sets the address and size of the IMA
measurement log in the architecture specific field in struct kimage.
This function does not have architecture specific code, but is
currently limited to powerpc.

Move arch_ima_add_kexec_buffer() to
security/integrity/ima/ima_kexec.c so that it is accessible for
other architectures as well.

Signed-off-by: Lakshmi Ramasubramanian <nramas at linux.microsoft.com>
---
 arch/powerpc/include/asm/ima.h     |  3 ---
 arch/powerpc/kexec/ima.c           | 21 ---------------------
 security/integrity/ima/ima.h       |  4 ----
 security/integrity/ima/ima_kexec.c | 21 +++++++++++++++++++++
 4 files changed, 21 insertions(+), 28 deletions(-)

diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
index 3875c9334d64..cb088e442d11 100644
--- a/arch/powerpc/include/asm/ima.h
+++ b/arch/powerpc/include/asm/ima.h
@@ -5,9 +5,6 @@
 #include <linux/of.h>
 
 #ifdef CONFIG_IMA_KEXEC
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
-			      size_t size);
-
 int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
 #else
 static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
index 82730c13a4df..d66ae17c64af 100644
--- a/arch/powerpc/kexec/ima.c
+++ b/arch/powerpc/kexec/ima.c
@@ -12,27 +12,6 @@
 #include <linux/libfdt.h>
 #include <asm/ima.h>
 
-/**
- * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
- *
- * @image: kimage struct to set IMA buffer data
- * @load_addr: Starting address where IMA buffer is loaded at
- * @size: Number of bytes in the IMA buffer
- *
- * Architectures should use this function to pass on the IMA buffer
- * information to the next kernel.
- *
- * Return: 0 on success, negative errno on error.
- */
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
-			      size_t size)
-{
-	image->arch.ima_buffer_addr = load_addr;
-	image->arch.ima_buffer_size = size;
-
-	return 0;
-}
-
 static int write_number(void *p, u64 value, int cells)
 {
 	if (cells == 1) {
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 6ebefec616e4..7c3947ad3773 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -24,10 +24,6 @@
 
 #include "../integrity.h"
 
-#ifdef CONFIG_HAVE_IMA_KEXEC
-#include <asm/ima.h>
-#endif
-
 enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN,
 		     IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII };
 enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 };
diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c
index 9527118939b8..7293eb4545ac 100644
--- a/security/integrity/ima/ima_kexec.c
+++ b/security/integrity/ima/ima_kexec.c
@@ -75,6 +75,27 @@ static int ima_dump_measurement_list(unsigned long *buffer_size, void **buffer,
 	return ret;
 }
 
+/**
+ * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
+ *
+ * @image: kimage struct to set IMA buffer data
+ * @load_addr: Starting address where IMA buffer is loaded at
+ * @size: Number of bytes in the IMA buffer
+ *
+ * Architectures should use this function to pass on the IMA buffer
+ * information to the next kernel.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+static int arch_ima_add_kexec_buffer(struct kimage *image,
+				     unsigned long load_addr, size_t size)
+{
+	image->arch.ima_buffer_addr = load_addr;
+	image->arch.ima_buffer_size = size;
+
+	return 0;
+}
+
 /*
  * Called during kexec_file_load so that IMA can add a segment to the kexec
  * image for the measurement list for the next kernel.
-- 
2.29.2