[PATCH 20/25] net: stmmac: Add Tx/Rx platform clocks support

Serge Semin Sergey.Semin at baikalelectronics.ru
Mon Dec 14 04:16:10 EST 2020


Depending on the DW *MAC configuration it can be at least connected to an
external Transmit clock, but in some cases to an external Receive clock
generator. In order to simplify/unify the sub-drivers code and to prevent
having the same clocks named differently add the Tx/Rx clocks support to
the generic STMMAC DT-based platform data initialization method under the
names "tx" and "rx" respectively. The bindings schema has already been
altered in accordance with that.

Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
---
 .../ethernet/stmicro/stmmac/stmmac_platform.c | 24 +++++++++++++++++++
 include/linux/stmmac.h                        |  2 ++
 2 files changed, 26 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 38e8836861c4..943498d57e3a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -588,6 +588,24 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 
 	clk_prepare_enable(plat->pclk);
 
+	plat->tx_clk = devm_clk_get_optional(&pdev->dev, "tx");
+	if (IS_ERR(plat->tx_clk)) {
+		rc = PTR_ERR(plat->tx_clk);
+		dev_err_probe(&pdev->dev, rc, "Cannot get Tx clock\n");
+		goto error_tx_clk_get;
+	}
+
+	clk_prepare_enable(plat->tx_clk);
+
+	plat->rx_clk = devm_clk_get_optional(&pdev->dev, "rx");
+	if (IS_ERR(plat->rx_clk)) {
+		rc = PTR_ERR(plat->rx_clk);
+		dev_err_probe(&pdev->dev, rc, "Cannot get Rx clock\n");
+		goto error_rx_clk_get;
+	}
+
+	clk_prepare_enable(plat->rx_clk);
+
 	/* Fall-back to main clock in case of no PTP ref is passed */
 	plat->clk_ptp_ref = devm_clk_get_optional(&pdev->dev, "ptp_ref");
 	if (IS_ERR(plat->clk_ptp_ref)) {
@@ -613,6 +631,10 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	return plat;
 
 error_hw_init:
+	clk_disable_unprepare(plat->rx_clk);
+error_rx_clk_get:
+	clk_disable_unprepare(plat->tx_clk);
+error_tx_clk_get:
 	clk_disable_unprepare(plat->pclk);
 error_pclk_get:
 	clk_disable_unprepare(plat->stmmac_clk);
@@ -634,6 +656,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 void stmmac_remove_config_dt(struct platform_device *pdev,
 			     struct plat_stmmacenet_data *plat)
 {
+	clk_disable_unprepare(plat->rx_clk);
+	clk_disable_unprepare(plat->tx_clk);
 	clk_disable_unprepare(plat->pclk);
 	clk_disable_unprepare(plat->stmmac_clk);
 	of_node_put(plat->phy_node);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 628e28903b8b..b75cf13d088c 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -185,6 +185,8 @@ struct plat_stmmacenet_data {
 	void *bsp_priv;
 	struct clk *stmmac_clk;
 	struct clk *pclk;
+	struct clk *tx_clk;
+	struct clk *rx_clk;
 	struct clk *clk_ptp_ref;
 	unsigned int clk_ptp_rate;
 	unsigned int clk_ref_rate;
-- 
2.29.2




More information about the linux-arm-kernel mailing list