[PATCH 04/25] dt-bindings: net: dwmac: Refactor snps, *-config properties
Serge Semin
Sergey.Semin at baikalelectronics.ru
Mon Dec 14 04:15:54 EST 2020
Currently the "snps,axi-config", "snps,mtl-rx-config" and
"snps,mtl-tx-config" properties are declared as a single phandle reference
to a node with corresponding parameters defined. That's not good for
several reasons. First of all scattering around a device tree some
particular device-specific configs with no visual relation to that device
isn't suitable from maintainability point of view. That leads to a
disturbed representation of the actual device tree mixing actual device
nodes and some vendor-specific configs. Secondly using the same configs
set for several device nodes doesn't represent well the devices structure,
since the interfaces these configs describe in hardware belong to
different devices and may actually differ. In the later case having the
configs node separated from the corresponding device nodes gets to be
even unjustified.
So instead of having a separate DW *MAC configs nodes we suggest to
define them as sub-nodes of the device nodes, which interfaces they
actually describe. By doing so we'll make the DW *MAC nodes visually
correct describing all the aspects of the IP-core configuration. Thus
we'll be able to describe the configs sub-nodes bindings right in the
snps,dwmac.yaml file.
Note the former "snps,axi-config", "snps,mtl-rx-config" and
"snps,mtl-tx-config" bindings have been marked as deprecated.
Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
---
Note the current DT schema tool requires the vendor-specific properties to be
defined in accordance with the schema: dtschema/meta-schemas/vendor-props.yaml
It means the property can be;
- boolean,
- string,
- defined with $ref and additional constraints,
- defined with allOf: [ $ref ] and additional constraints.
The modification provided by this commit needs to extend that definition to
make the DT schema tool correctly parse this schema. That is we need to let
the vendors-specific properties to also accept the oneOf-based combined
sub-schema. Like this:
--- a/dtschema/meta-schemas/vendor-props.yaml
+++ b/dtschema/meta-schemas/vendor-props.yaml
@@ -48,15 +48,24 @@
- properties: # A property with a type and additional constraints
$ref:
pattern: "types.yaml#[\/]{0,1}definitions\/.*"
- allOf:
- items:
- - properties:
+
+ if:
+ not:
+ required:
+ - $ref
+ then:
+ patternProperties:
+ "^(all|one)Of$":
+ contains:
+ properties:
$ref:
pattern: "types.yaml#[\/]{0,1}definitions\/.*"
required:
- $ref
- oneOf:
+
+ anyOf:
- required: [ $ref ]
- required: [ allOf ]
+ - required: [ oneOf ]
...
---
.../devicetree/bindings/net/snps,dwmac.yaml | 380 +++++++++++++-----
1 file changed, 288 insertions(+), 92 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 0dd543c6c08e..44aa88151cba 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -150,69 +150,251 @@ properties:
in a different mode than the PHY in order to function.
snps,axi-config:
- $ref: /schemas/types.yaml#definitions/phandle
- description:
- AXI BUS Mode parameters. Phandle to a node that can contain the
- following properties
- * snps,lpi_en, enable Low Power Interface
- * snps,xit_frm, unlock on WoL
- * snps,wr_osr_lmt, max write outstanding req. limit
- * snps,rd_osr_lmt, max read outstanding req. limit
- * snps,kbbe, do not cross 1KiB boundary.
- * snps,blen, this is a vector of supported burst length.
- * snps,fb, fixed-burst
- * snps,mb, mixed-burst
- * snps,rb, rebuild INCRx Burst
+ description: AXI BUS Mode parameters
+ oneOf:
+ - deprecated: true
+ $ref: /schemas/types.yaml#definitions/phandle
+ - type: object
+ properties:
+ snps,lpi_en:
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Enable Low Power Interface
+
+ snps,xit_frm:
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Unlock on WoL
+
+ snps,wr_osr_lmt:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Max write outstanding req. limit
+ default: 1
+ minimum: 0
+ maximum: 15
+
+ snps,rd_osr_lmt:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Max read outstanding req. limit
+ default: 1
+ minimum: 0
+ maximum: 15
+
+ snps,kbbe:
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Do not cross 1KiB boundary
+
+ snps,blen:
+ $ref: /schemas/types.yaml#definitions/uint32-array
+ description: A vector of supported burst lengths
+ minItems: 7
+ maxItems: 7
+ items:
+ enum: [256, 128, 64, 32, 16, 8, 4, 0]
+
+ snps,fb:
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Fixed-burst
+
+ snps,mb:
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Mixed-burst
+
+ snps,rb:
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Rebuild INCRx Burst
+
+ additionalProperties: false
snps,mtl-rx-config:
- $ref: /schemas/types.yaml#definitions/phandle
description:
- Multiple RX Queues parameters. Phandle to a node that can
- contain the following properties
- * snps,rx-queues-to-use, number of RX queues to be used in the
- driver
- * Choose one of these RX scheduling algorithms
- * snps,rx-sched-sp, Strict priority
- * snps,rx-sched-wsp, Weighted Strict priority
- * For each RX queue
- * Choose one of these modes
- * snps,dcb-algorithm, Queue to be enabled as DCB
- * snps,avb-algorithm, Queue to be enabled as AVB
- * snps,map-to-dma-channel, Channel to map
- * Specifiy specific packet routing
- * snps,route-avcp, AV Untagged Control packets
- * snps,route-ptp, PTP Packets
- * snps,route-dcbcp, DCB Control Packets
- * snps,route-up, Untagged Packets
- * snps,route-multi-broad, Multicast & Broadcast Packets
- * snps,priority, RX queue priority (Range 0x0 to 0xF)
+ Multiple RX Queues parameters
+ oneOf:
+ - deprecated: true
+ $ref: /schemas/types.yaml#definitions/phandle
+ - type: object
+ properties:
+ snps,rx-queues-to-use:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Number of RX queues to be used in the driver
+ default: 1
+ minimum: 1
+
+ patternProperties:
+ "^snps,rx-sched-(sp|wsp)$":
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Strict/Weighted Strict RX scheduling priority
+
+ "^queue[0-9]$":
+ type: object
+ description: Each RX Queue parameters
+
+ properties:
+ snps,map-to-dma-channel:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: DMA channel to map
+
+ snps,priority:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: RX queue priority
+ minimum: 0
+ maximum: 15
+
+ patternProperties:
+ "^snps,(dcb|avb)-algorithm$":
+ $ref: /schemas/types.yaml#definitions/flag
+ description: Enable Queue as DCB/AVB
+
+ "^snps,route-(avcp|ptp|dcbcp|up|multi-broad)$":
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ AV Untagged/PTP/DCB Control/Untagged/Multicast & Broadcast
+ packets routing respectively.
+
+ additionalProperties: false
+
+ # Choose only one of the Queue modes and the packets routing
+ allOf:
+ - not:
+ required:
+ - snps,dcb-algorithm
+ - snps,avb-algorithm
+ - oneOf:
+ - required:
+ - snps,route-avcp
+ - required:
+ - snps,route-ptp
+ - required:
+ - snps,route-dcbcp
+ - required:
+ - snps,route-up
+ - required:
+ - snps,route-multi-broad
+ - not:
+ anyOf:
+ - required:
+ - snps,route-avcp
+ - required:
+ - snps,route-ptp
+ - required:
+ - snps,route-dcbcp
+ - required:
+ - snps,route-up
+ - required:
+ - snps,route-multi-broad
+
+ additionalProperties: false
+
+ # Choose one of the RX scheduling algorithms
+ not:
+ required:
+ - snps,rx-sched-sp
+ - snps,rx-sched-wsp
snps,mtl-tx-config:
- $ref: /schemas/types.yaml#definitions/phandle
description:
- Multiple TX Queues parameters. Phandle to a node that can
- contain the following properties
- * snps,tx-queues-to-use, number of TX queues to be used in the
- driver
- * Choose one of these TX scheduling algorithms
- * snps,tx-sched-wrr, Weighted Round Robin
- * snps,tx-sched-wfq, Weighted Fair Queuing
- * snps,tx-sched-dwrr, Deficit Weighted Round Robin
- * snps,tx-sched-sp, Strict priority
- * For each TX queue
- * snps,weight, TX queue weight (if using a DCB weight
- algorithm)
- * Choose one of these modes
- * snps,dcb-algorithm, TX queue will be working in DCB
- * snps,avb-algorithm, TX queue will be working in AVB
- [Attention] Queue 0 is reserved for legacy traffic
- and so no AVB is available in this queue.
- * Configure Credit Base Shaper (if AVB Mode selected)
- * snps,send_slope, enable Low Power Interface
- * snps,idle_slope, unlock on WoL
- * snps,high_credit, max write outstanding req. limit
- * snps,low_credit, max read outstanding req. limit
- * snps,priority, TX queue priority (Range 0x0 to 0xF)
+ Multiple TX Queues parameters
+ oneOf:
+ - deprecated: true
+ $ref: /schemas/types.yaml#definitions/phandle
+ - type: object
+ properties:
+ snps,tx-queues-to-use:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Number of TX queues to be used in the driver
+ default: 1
+ minimum: 1
+
+ patternProperties:
+ "^snps,tx-sched-(wrr|wfq|dwrr|sp)$":
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Weighted Round Robin, Weighted Fair Queuing,
+ Deficit Weighted Round Robin or Strict TX scheduling priority.
+
+ "^queue[0-9]$":
+ type: object
+ description: Each TX Queue parameters
+
+ properties:
+ snps,priority:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: TX queue priority
+ minimum: 0
+ maximum: 15
+
+ snps,weight:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: TX queue weight (if using a DCB weight algorithm)
+ minimum: 0
+ maximum: 0x1FFFFF
+
+ snps,send_slope:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Enable Low Power Interface
+ minimum: 0
+ maximum: 0x3FFF
+
+ snps,idle_slope:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Unlock on WoL
+ minimum: 0
+ maximum: 0x1FFFFF
+
+ snps,high_credit:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Max write outstanding req. limit
+ minimum: 0
+ maximum: 0x1FFFFFFF
+
+ snps,low_credit:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: Max read outstanding req. limit
+ minimum: 0
+ maximum: 0x1FFFFFFF
+
+ patternProperties:
+ "^snps,(dcb|avb)-algorithm$":
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enable Queue as DCB/AVB. Note Queue 0 is reserved for legacy
+ traffic and so no AVB is available in this queue.
+
+ additionalProperties: false
+
+ # Choose only one of the Queue modes
+ not:
+ required:
+ - snps,dcb-algorithm
+ - snps,avb-algorithm
+
+ # Credit Base Shaper is configurable for AVB Mode only
+ dependencies:
+ snps,send_slope: ["snps,avb-algorithm"]
+ snps,idle_slope: ["snps,avb-algorithm"]
+ snps,high_credit: ["snps,avb-algorithm"]
+ snps,low_credit: ["snps,avb-algorithm"]
+
+ additionalProperties: false
+
+ # Choose one of the TX scheduling algorithms
+ oneOf:
+ - required:
+ - snps,tx-sched-wrr
+ - required:
+ - snps,tx-sched-wfq
+ - required:
+ - snps,tx-sched-dwrr
+ - required:
+ - snps,tx-sched-sp
+ - not:
+ anyOf:
+ - required:
+ - snps,tx-sched-wrr
+ - required:
+ - snps,tx-sched-wfq
+ - required:
+ - snps,tx-sched-dwrr
+ - required:
+ - snps,tx-sched-sp
snps,reset-gpio:
deprecated: true
@@ -342,41 +524,6 @@ additionalProperties: true
examples:
- |
- stmmac_axi_setup: stmmac-axi-config {
- snps,wr_osr_lmt = <0xf>;
- snps,rd_osr_lmt = <0xf>;
- snps,blen = <256 128 64 32 0 0 0>;
- };
-
- mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <1>;
- snps,rx-sched-sp;
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,priority = <0x0>;
- };
- };
-
- mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <2>;
- snps,tx-sched-wrr;
- queue0 {
- snps,weight = <0x10>;
- snps,dcb-algorithm;
- snps,priority = <0x0>;
- };
-
- queue1 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3E800>;
- snps,low_credit = <0xFFC18000>;
- snps,priority = <0x1>;
- };
- };
-
gmac0: ethernet at e0800000 {
compatible = "snps,dwxgmac-2.10", "snps,dwxgmac";
reg = <0xe0800000 0x8000>;
@@ -404,6 +551,55 @@ examples:
};
};
};
+ - |
+ gmac1: ethernet at f8010000 {
+ compatible = "snps,dwmac-4.10a", "snps,dwmac";
+ reg = <0xf8010000 0x4000>;
+ interrupts = <0 98 4>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth", "ptp_ref";
+ clocks = <&clock 4>, <&clock 5>;
+ phy-mode = "rgmii";
+ snps,txpbl = <8>;
+ snps,rxpbl = <2>;
+ snps,aal;
+ snps,tso;
+
+ snps,axi-config {
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
+ snps,mtl-rx-config {
+ snps,rx-queues-to-use = <1>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,priority = <0x0>;
+ };
+ };
+
+ snps,mtl-tx-config {
+ snps,tx-queues-to-use = <2>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+
+ queue1 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3E800>;
+ snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
+ };
+ };
+ };
# FIXME: We should set it, but it would report all the generic
# properties as additional properties.
--
2.29.2
More information about the linux-arm-kernel
mailing list