[PATCH v2 00/21] arm64: sunxi: Initial Allwinner H616 SoC support
André Przywara
andre.przywara at arm.com
Sun Dec 13 20:18:57 EST 2020
On 13/12/2020 17:47, Icenowy Zheng wrote:
Hi Icenowy,
> 在 2020-12-11星期五的 01:19 +0000，Andre Przywara写道：
>> Hi,
>>
>> this is the quite expanded second version of the support series for
>> the
>> Allwinner H616 SoC.
>> Besides many fixes for the bugs discovered by the diligent reviewers
>> (many thanks for that!) this version adds some patches to support
>> some
>> slightly changed devices, like the second EMAC and the AXP not having
>> an interrupt.
>> Also I added quite some DT binding doc patches.
>> USB still does not work, but I include the patches anyway, hoping
>> that
>> someone can help spotting the issue.
>> For a more detailed changelog see below.
>>
>> Thanks!
>> Andre
>>
>> ==================
>> This series gathers patches to support the Allwinner H616 SoC. This
>> is
>> a rather uninspired SoC (Quad-A53 with the usual peripherals), but
>> allows for some cheap development boards and TV boxes, and supports
>> up to 4GB of DRAM.
>>
>> Various DT binding patches are sprinkled throughout the series, to
>> add
>> the new compatible names right before they are used.
>> Patch 1/21 is the usual drive-by fix, discovered while staring at
>> the H6 clock code.
>> Patch 3 and 4 add pinctrl support, with the "-R" controller now being
>> crippled down to two I2C pins only. If we grow tired of repeating
>> this
>> exercise for every new SoC variant, I am happy to revive my more
>> versatile sunxi pinctrl driver effort from a few years back [1].
>> Patch 6 and 7 add clock support. For the -R clock this is shared with
>> the H6 code, as the clocks are identical, with the H616 just having
>> fewer of them. The main clocks are different enough to warrant a
>> separate
>> file.
>> Patch 08/21 is pulling a patch from Yangtao's A100 series, since we
>> need
>> the same fix for MMC support. This will probably be merged
>> separately,
>> I just include this here to provide a bootable solution.
>> Patch 10 teaches the AXP MFD driver to get along without having an
>> interrupt, as the H616 apparently does not have an NMI controller
>> anymore.
>> Patch 12 and 13 add some tweaks to the syscon and EMAC driver, to
>> deal
>> with the second EMAC clock used for the second Ethernet controller.
>> Patches 14 and 15 *try* to add USB support. The same approach works
>> with
>> the very similar U-Boot PHY driver, but for some reason still fail in
>> Linux. Maybe someone spots the issue and can help fixing it?
>
> There's a judge currently checks for phy type A83T/H6. You may need to
> add H616 there.
You mean for setting PHY_CTL_VBUSVLDEXT and clearing PHY_CTL_SIDDQ? This
is guarded by .type == sun50i_h6_phy, which I also use for the H616.
So this should be covered.
> Or should we have a bool in the data struct to mark it? I think all
> chips that need that is 28nm.
Yeah, the usage of .type seems somewhat arbitrary, at the end of the day
it's just another quirk for a group of SoCs.
Thanks!
Andre
>
>>
>> The remaining patches add DT bindings, which just add the new
>> compatible
>> string along with an existing name as a fallback string.
>> Eventually we get the .dtsi for the SoC in patch 19, and the .dts for
>> the OrangePi Zero2 board[2] in the last patch.
>>
>> We have U-Boot and Trusted-Firmware support in a working state,
>> booting
>> via FEL and even TFTPing kernels work already [3][4].
>>
>> Many thanks to Jernej for his tremendous help on this, also for the
>> awesome input and help from the #linux-sunxi Freenode channel.
>>
>> The whole series can also be found here:
>> https://github.com/apritzel/linux/commits/h616-v2
>>
>> Happy reviewing!
>>
>> Cheers,
>> Andre
>>
>> [1]
>> https://patchwork.ozlabs.org/project/linux-gpio/cover/20171113012523.2328-1-andre.przywara@arm.com/
>> [2] https://linux-sunxi.org/Xunlong_Orange_Pi_Zero2
>> [3] https://github.com/jernejsk/u-boot/commits/h616-v1
>> [4] https://github.com/apritzel/arm-trusted-firmware/commits/h616-WIP
>>
>> Changelog v1 .. v2:
>> - pinctrl: adjust irq bank map to cover undocumented GPIO bank IRQs
>> - use differing h_i2s0 pin output names
>> - r-ccu: fix number of used clocks
>> - ccu: remove PLL-PERIPHy(4X)
>> - ccu: fix gpu1 divider range
>> - ccu: fix usb-phy3 parent
>> - ccu: add missing TV clocks
>> - ccu: rework to CLK_OF_DECLARE style
>> - ccu: enable output bit for PLL clocks
>> - ccu: renumber clocks
>> - .dtsi: drop sun50i-a64-system-control fallback
>> - .dtsi: drop unknown SRAM regions
>> - .dtsi: add more (undocumented) GPIO interrupts
>> - .dtsi: fix I2C3 pin names
>> - .dtsi: use a100-emmc fallback for MMC2
>> - .dtsi: add second EMAC controller
>> - .dtsi: use H3 MUSB controller fallback
>> - .dtsi: fix frame size for USB PHY PMU registers
>> - .dtsi: add USB0 PHY references
>> - .dtsi: fix IR controller clock source
>> - .dts: fix LED naming and swap pins
>> - .dts: use 5V supply parent for USB supply
>> - .dts: drop dummy IRQ for AXP
>> - .dts: enable 3V3 header pin power rail
>> - .dts: add SPI flash node
>> - .dts: make USB-C port peripheral only
>> - add IRQ-less AXP support
>> - add two patches to support more than one EMAC clock
>> - add patch to rework and extend USB PHY support
>> - add DT binding documentation patches
>>
>> Andre Przywara (18):
>> clk: sunxi-ng: h6: Fix clock divider range on some clocks
>> dt-bindings: pinctrl: Add Allwinner H616 compatible strings
>> pinctrl: sunxi: Add support for the Allwinner H616 pin controller
>> pinctrl: sunxi: Add support for the Allwinner H616-R pin controller
>> dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner
>> H616
>> clk: sunxi-ng: Add support for the Allwinner H616 R-CCU
>> clk: sunxi-ng: Add support for the Allwinner H616 CCU
>> mfd: axp20x: Allow AXP chips without interrupt lines
>> dt-bindings: sram: sunxi-sram: Add H616 compatible string
>> soc: sunxi: sram: Add support for more than one EMAC clock
>> net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register
>> phy: sun4i-usb: Rework "pmu_unk1" handling
>> phy: sun4i-usb: Add support for the H616 USB PHY
>> dt-bindings: watchdog: sun4i: Add H616 compatible string
>> dt-bindings: allwinner: Add H616 compatible strings
>> arm64: dts: allwinner: Add Allwinner H616 .dtsi file
>> dt-bindings: arm: sunxi: Add OrangePi Zero 2 binding
>> arm64: dts: allwinner: Add OrangePi Zero 2 .dts
>>
>> Yangtao Li (3):
>> dt-bindings: mmc: sunxi: Add Allwinner A100 and H616 compatibles
>> mmc: sunxi: add support for A100 mmc controller
>> dt-bindings: watchdog: sun4i: Add A100 compatible
>>
>> .../devicetree/bindings/arm/sunxi.yaml | 5 +
>> .../clock/allwinner,sun4i-a10-ccu.yaml | 2 +
>> .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 21 +-
>> .../media/allwinner,sun4i-a10-ir.yaml | 16 +-
>> .../bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 8 +
>> .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 2 +
>> .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 3 +
>> .../bindings/spi/allwinner,sun6i-a31-spi.yaml | 1 +
>> .../allwinner,sun4i-a10-system-control.yaml | 1 +
>> .../watchdog/allwinner,sun4i-a10-wdt.yaml | 9 +-
>> arch/arm64/boot/dts/allwinner/Makefile | 1 +
>> .../allwinner/sun50i-h616-orangepi-zero2.dts | 240 ++++
>> .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 715 ++++++++++
>> drivers/clk/sunxi-ng/Kconfig | 7 +-
>> drivers/clk/sunxi-ng/Makefile | 1 +
>> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 47 +-
>> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 3 +-
>> drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 +-
>> drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1150
>> +++++++++++++++++
>> drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 56 +
>> drivers/mfd/axp20x.c | 17 +-
>> drivers/mmc/host/sunxi-mmc.c | 28 +-
>> .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 12 +-
>> drivers/phy/allwinner/phy-sun4i-usb.c | 39 +-
>> drivers/pinctrl/sunxi/Kconfig | 10 +
>> drivers/pinctrl/sunxi/Makefile | 2 +
>> drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c | 54 +
>> drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c | 548 ++++++++
>> drivers/soc/sunxi/sunxi_sram.c | 31 +-
>> include/dt-bindings/clock/sun50i-h616-ccu.h | 115 ++
>> include/dt-bindings/reset/sun50i-h616-ccu.h | 70 +
>> 31 files changed, 3151 insertions(+), 71 deletions(-)
>> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-
>> orangepi-zero2.dts
>> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.c
>> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.h
>> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c
>> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c
>> create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h
>> create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h
>>
More information about the linux-arm-kernel
mailing list