[PATCH v2 14/21] phy: sun4i-usb: Rework "pmu_unk1" handling
Icenowy Zheng
icenowy at aosc.io
Sun Dec 13 13:24:58 EST 2020
在 2020-12-11星期五的 01:19 +0000,Andre Przywara写道:
> Newer SoCs (A100, H616) need to clear a different bit in our
> "unknown"
> PMU PHY register.
It looks like that the unknown PHY register is PHYCTL register for each
individual PHY, and the bit that is cleared is
called SUNXI_HCI_PHY_CTRL_SIDDQ in the BSP (similar to
the USBC_PHY_CTL_SIDDQ we cleared for main PHYCTL).
>
> Generalise the existing code by allowing configs to specify a bitmask
> of bits to clear.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> drivers/phy/allwinner/phy-sun4i-usb.c | 28 +++++++++++------------
> ----
> 1 file changed, 11 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> b/drivers/phy/allwinner/phy-sun4i-usb.c
> index 651d5e2a25ce..4ba0699e0bb4 100644
> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> @@ -115,9 +115,9 @@ struct sun4i_usb_phy_cfg {
> int hsic_index;
> enum sun4i_usb_phy_type type;
> u32 disc_thresh;
> + u32 pmu_unk1_clrbits;
> u8 phyctl_offset;
> bool dedicated_clocks;
> - bool enable_pmu_unk1;
> bool phy0_dual_route;
> int missing_phys;
> };
> @@ -288,6 +288,12 @@ static int sun4i_usb_phy_init(struct phy *_phy)
> return ret;
> }
>
> + if (phy->pmu && data->cfg->pmu_unk1_clrbits) {
> + val = readl(phy->pmu + REG_PMU_UNK1);
> + val &= ~data->cfg->pmu_unk1_clrbits;
> + writel(val, phy->pmu + REG_PMU_UNK1);
> + }
> +
> if (data->cfg->type == sun8i_a83t_phy ||
> data->cfg->type == sun50i_h6_phy) {
> if (phy->index == 0) {
> @@ -297,11 +303,6 @@ static int sun4i_usb_phy_init(struct phy *_phy)
> writel(val, data->base + data->cfg-
> >phyctl_offset);
> }
> } else {
> - if (phy->pmu && data->cfg->enable_pmu_unk1) {
> - val = readl(phy->pmu + REG_PMU_UNK1);
> - writel(val & ~2, phy->pmu + REG_PMU_UNK1);
> - }
> -
> /* Enable USB 45 Ohm resistor calibration */
> if (phy->index == 0)
> sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN,
> 0x01, 1);
> @@ -867,7 +868,6 @@ static const struct sun4i_usb_phy_cfg
> sun4i_a10_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A10,
> .dedicated_clocks = false,
> - .enable_pmu_unk1 = false,
> };
>
> static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
> @@ -876,7 +876,6 @@ static const struct sun4i_usb_phy_cfg
> sun5i_a13_cfg = {
> .disc_thresh = 2,
> .phyctl_offset = REG_PHYCTL_A10,
> .dedicated_clocks = false,
> - .enable_pmu_unk1 = false,
> };
>
> static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
> @@ -885,7 +884,6 @@ static const struct sun4i_usb_phy_cfg
> sun6i_a31_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A10,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = false,
> };
>
> static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
> @@ -894,7 +892,6 @@ static const struct sun4i_usb_phy_cfg
> sun7i_a20_cfg = {
> .disc_thresh = 2,
> .phyctl_offset = REG_PHYCTL_A10,
> .dedicated_clocks = false,
> - .enable_pmu_unk1 = false,
> };
>
> static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
> @@ -903,7 +900,6 @@ static const struct sun4i_usb_phy_cfg
> sun8i_a23_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A10,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = false,
> };
>
> static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
> @@ -912,7 +908,6 @@ static const struct sun4i_usb_phy_cfg
> sun8i_a33_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A33,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = false,
> };
>
> static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
> @@ -929,7 +924,7 @@ static const struct sun4i_usb_phy_cfg
> sun8i_h3_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A33,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = true,
> + .pmu_unk1_clrbits = BIT(1),
> .phy0_dual_route = true,
> };
>
> @@ -939,7 +934,7 @@ static const struct sun4i_usb_phy_cfg
> sun8i_r40_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A33,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = true,
> + .pmu_unk1_clrbits = BIT(1),
> .phy0_dual_route = true,
> };
>
> @@ -949,7 +944,7 @@ static const struct sun4i_usb_phy_cfg
> sun8i_v3s_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A33,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = true,
> + .pmu_unk1_clrbits = BIT(1),
> .phy0_dual_route = true,
> };
>
> @@ -959,7 +954,7 @@ static const struct sun4i_usb_phy_cfg
> sun50i_a64_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A33,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = true,
> + .pmu_unk1_clrbits = BIT(1),
> .phy0_dual_route = true,
> };
>
> @@ -969,7 +964,6 @@ static const struct sun4i_usb_phy_cfg
> sun50i_h6_cfg = {
> .disc_thresh = 3,
> .phyctl_offset = REG_PHYCTL_A33,
> .dedicated_clocks = true,
> - .enable_pmu_unk1 = true,
> .phy0_dual_route = true,
> .missing_phys = BIT(1) | BIT(2),
> };
More information about the linux-arm-kernel
mailing list