[PATCH 3/4] arm64: dts: imx8mq-librem5-devkit: Mark more regulators as always-on

Guido Günther agx at sigxcpu.org
Sun Dec 13 12:17:13 EST 2020


They power vital parts of the board and low power consumption is not
really an issue here. It also brings things more in line with what
Purism is using downstream.

Signed-off-by: Guido Günther <agx at sigxcpu.org>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 12f5d75a5e44..5fdea6b74ed5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -297,7 +297,7 @@ buck1_reg: BUCK1 {
 				regulator-name = "buck1";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
+				regulator-always-on;
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <900000>;
 				rohm,dvs-idle-voltage = <850000>;
@@ -308,7 +308,7 @@ buck2_reg: BUCK2 {
 				regulator-name = "buck2";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
+				regulator-always-on;
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <1000000>;
 				rohm,dvs-idle-voltage = <900000>;
@@ -318,7 +318,7 @@ buck3_reg: BUCK3 {
 				regulator-name = "buck3";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
+				regulator-always-on;
 				rohm,dvs-run-voltage = <900000>;
 			};
 
@@ -333,7 +333,7 @@ buck5_reg: BUCK5 {
 				regulator-name = "buck5";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			buck6_reg: BUCK6 {
@@ -354,7 +354,7 @@ buck8_reg: BUCK8 {
 				regulator-name = "buck8";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo1_reg: LDO1 {
@@ -379,34 +379,35 @@ ldo3_reg: LDO3 {
 				regulator-name = "ldo3";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo4_reg: LDO4 {
 				regulator-name = "ldo4";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo5_reg: LDO5 {
 				regulator-name = "ldo5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			ldo6_reg: LDO6 {
 				regulator-name = "ldo6";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo7_reg: LDO7 {
 				regulator-name = "ldo7";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 		};
 	};
-- 
2.29.2




More information about the linux-arm-kernel mailing list