[PATCH v3 3/5] dt-bindings: phy: Convert mixel,mipi-dsi-phy to json-schema

[Guido Günther]

Hi,
On Fri, Dec 11, 2020 at 09:46:20AM +0800, Liu Ying wrote:
> This patch converts the mixel,mipi-dsi-phy binding to
> DT schema format using json-schema.
> 
> Comparing to the plain text version, the new binding adds
> the 'assigned-clocks', 'assigned-clock-parents' and
> 'assigned-clock-rates' properites, otherwise 'make dtbs_check'
> would complain that there are mis-matches.  Also, the new
> binding requires the 'power-domains' property since all potential
> SoCs that embed this PHY would provide a power domain for it.
> The example of the new binding takes reference to the latest
> dphy node in imx8mq.dtsi.
> 
> Cc: Guido Günther <agx at sigxcpu.org>
> Cc: Kishon Vijay Abraham I <kishon at ti.com>
> Cc: Vinod Koul <vkoul at kernel.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v2->v3:
> * Improve the 'clock-names' property by dropping 'items:'.
> 
> v1->v2:
> * Newly introduced in v2.  (Guido)
> 
>  .../devicetree/bindings/phy/mixel,mipi-dsi-phy.txt | 29 ---------
>  .../bindings/phy/mixel,mipi-dsi-phy.yaml           | 72 ++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 29 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> deleted file mode 100644
> index 9b23407..00000000
> --- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -Mixel DSI PHY for i.MX8
> -
> -The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
> -MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
> -electrical signals for DSI.
> -
> -Required properties:
> -- compatible: Must be:
> -  - "fsl,imx8mq-mipi-dphy"
> -- clocks: Must contain an entry for each entry in clock-names.
> -- clock-names: Must contain the following entries:
> -  - "phy_ref": phandle and specifier referring to the DPHY ref clock
> -- reg: the register range of the PHY controller
> -- #phy-cells: number of cells in PHY, as defined in
> -  Documentation/devicetree/bindings/phy/phy-bindings.txt
> -  this must be <0>
> -
> -Optional properties:
> -- power-domains: phandle to power domain
> -
> -Example:
> -	dphy: dphy at 30a0030 {
> -		compatible = "fsl,imx8mq-mipi-dphy";
> -		clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> -		clock-names = "phy_ref";
> -		reg = <0x30a00300 0x100>;
> -		power-domains = <&pd_mipi0>;
> -		#phy-cells = <0>;
> -        };
> diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
> new file mode 100644
> index 00000000..c34f2e6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mixel DSI PHY for i.MX8
> +
> +maintainers:
> +  - Guido Günther <agx at sigxcpu.org>
> +
> +description: |
> +  The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
> +  MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
> +  electrical signals for DSI.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mq-mipi-dphy
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: phy_ref
> +
> +  assigned-clocks:
> +    maxItems: 1
> +
> +  assigned-clock-parents:
> +    maxItems: 1
> +
> +  assigned-clock-rates:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - assigned-clocks
> +  - assigned-clock-parents
> +  - assigned-clock-rates
> +  - "#phy-cells"
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    dphy: dphy at 30a0030 {
> +        compatible = "fsl,imx8mq-mipi-dphy";
> +        reg = <0x30a00300 0x100>;
> +        clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> +        clock-names = "phy_ref";
> +        assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> +        assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
> +        assigned-clock-rates = <24000000>;
> +        #phy-cells = <0>;
> +        power-domains = <&pgc_mipi>;
> +    };


Reviewed-by: Guido Günther <agx at sigxcpu.org>

Thanks for the conversion!
 -- Guido



> -- 
> 2.7.4
>