[PATCH 3/9] ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato

[Marek Szyprowski]

On 10.12.2020 22:28, Krzysztof Kozlowski wrote:
> The Samsung PMIC datasheets describe the interrupt line as active low
> with a requirement of acknowledge from the CPU.  Without specifying the
> interrupt type in Devicetree, kernel might apply some fixed
> configuration, not necessarily working for this hardware.
>
> Fixes: faaf348ef468 ("ARM: dts: Add board dts file for exynos3250-rinato")
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> ---
>   arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> index a26e3e582a7e..d64ccf4b7d32 100644
> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> @@ -270,7 +270,7 @@ &i2c_0 {
>   	pmic at 66 {
>   		compatible = "samsung,s2mps14-pmic";
>   		interrupt-parent = <&gpx0>;
> -		interrupts = <7 IRQ_TYPE_NONE>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
>   		reg = <0x66>;
>   		wakeup-source;
>   

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland