[PATCH 7/9] arm64: dts: exynos: correct PMIC interrupt trigger level on TM2

[Krzysztof Kozlowski]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 03486a8ffc67..4c5106a0860d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -388,7 +388,7 @@ &hsi2c_0 {
 	pmic at 66 {
 		compatible = "samsung,s2mps13-pmic";
 		interrupt-parent = <&gpa0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		samsung,s2mps11-wrstbi-ground;
 
-- 
2.25.1