[PATCH v3 2/2] PCI: brcmstb: support BCM4908 with external PERST# signal controller
Rafał Miłecki
zajec5 at gmail.com
Thu Dec 10 13:04:21 EST 2020
From: Rafał Miłecki <rafal at milecki.pl>
BCM4908 uses external MISC block for controlling PERST# signal. Use it
as a reset controller.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
Acked-by: Florian Fainelli <f.fainelli at gmail.com>
---
V2: Reorder BCM4908 in the enum pcie_type
Use devm_reset_control_get_optional_exclusive()
Don't move hw_rev read up in the code
---
drivers/pci/controller/Kconfig | 2 +-
drivers/pci/controller/pcie-brcmstb.c | 32 +++++++++++++++++++++++++++
2 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 64e2f5e379aa..d44c70bb88f6 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -273,7 +273,7 @@ config VMD
config PCIE_BRCMSTB
tristate "Broadcom Brcmstb PCIe host controller"
- depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
+ depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || COMPILE_TEST
depends on OF
depends on PCI_MSI_IRQ_DOMAIN
default ARCH_BRCMSTB
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 9c3d2982248d..98536cf3af58 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -96,6 +96,7 @@
#define PCIE_MISC_REVISION 0x406c
#define BRCM_PCIE_HW_REV_33 0x0303
+#define BRCM_PCIE_HW_REV_3_20 0x0320
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
@@ -190,6 +191,7 @@
struct brcm_pcie;
static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val);
+static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val);
@@ -206,6 +208,7 @@ enum {
enum pcie_type {
GENERIC,
+ BCM4908,
BCM7278,
BCM2711,
};
@@ -230,6 +233,13 @@ static const struct pcie_cfg_data generic_cfg = {
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
+static const struct pcie_cfg_data bcm4908_cfg = {
+ .offsets = pcie_offsets,
+ .type = BCM4908,
+ .perst_set = brcm_pcie_perst_set_4908,
+ .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
+};
+
static const int pcie_offset_bcm7278[] = {
[RGR1_SW_INIT_1] = 0xc010,
[EXT_CFG_INDEX] = 0x9000,
@@ -282,6 +292,7 @@ struct brcm_pcie {
const int *reg_offsets;
enum pcie_type type;
struct reset_control *rescal;
+ struct reset_control *perst_reset;
int num_memc;
u64 memc_size[PCIE_BRCM_MAX_MEMC];
u32 hw_rev;
@@ -747,6 +758,17 @@ static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
}
+static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val)
+{
+ if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n"))
+ return;
+
+ if (val)
+ reset_control_assert(pcie->perst_reset);
+ else
+ reset_control_deassert(pcie->perst_reset);
+}
+
static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val)
{
u32 tmp;
@@ -1206,6 +1228,7 @@ static int brcm_pcie_remove(struct platform_device *pdev)
static const struct of_device_id brcm_pcie_match[] = {
{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
+ { .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
@@ -1262,6 +1285,11 @@ static int brcm_pcie_probe(struct platform_device *pdev)
clk_disable_unprepare(pcie->clk);
return PTR_ERR(pcie->rescal);
}
+ pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
+ if (IS_ERR(pcie->perst_reset)) {
+ clk_disable_unprepare(pcie->clk);
+ return PTR_ERR(pcie->perst_reset);
+ }
ret = reset_control_deassert(pcie->rescal);
if (ret)
@@ -1279,6 +1307,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
goto fail;
pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
+ if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
+ dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
+ goto fail;
+ }
msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
if (pci_msi_enabled() && msi_np == pcie->np) {
--
2.26.2
More information about the linux-arm-kernel
mailing list