[PATCH kvmtool 13/21] hw/serial: Refactor trap handler

[Andre Przywara]

With the planned retirement of the special ioport emulation code, we
need to provide an emulation function compatible with the MMIO prototype.

Adjust the trap handler to use that new function, and provide shims to
implement the old ioport interface, for now.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 hw/serial.c | 97 +++++++++++++++++++++++++++++++++++------------------
 1 file changed, 65 insertions(+), 32 deletions(-)

diff --git a/hw/serial.c b/hw/serial.c
index b0465d99..2907089c 100644
--- a/hw/serial.c
+++ b/hw/serial.c
@@ -242,36 +242,31 @@ void serial8250__inject_sysrq(struct kvm *kvm, char sysrq)
 	sysrq_pending = sysrq;
 }
 
-static bool serial8250_out(struct ioport *ioport, struct kvm_cpu *vcpu, u16 port,
-			   void *data, int size)
+static bool serial8250_out(struct serial8250_device *dev, struct kvm_cpu *vcpu,
+			   u16 offset, u8 data)
 {
-	struct serial8250_device *dev = ioport->priv;
-	u16 offset;
 	bool ret = true;
-	char *addr = data;
 
 	mutex_lock(&dev->mutex);
 
-	offset = port - dev->iobase;
-
 	switch (offset) {
 	case UART_TX:
 		if (dev->lcr & UART_LCR_DLAB) {
-			dev->dll = ioport__read8(data);
+			dev->dll = data;
 			break;
 		}
 
 		/* Loopback mode */
 		if (dev->mcr & UART_MCR_LOOP) {
 			if (dev->rxcnt < FIFO_LEN) {
-				dev->rxbuf[dev->rxcnt++] = *addr;
+				dev->rxbuf[dev->rxcnt++] = data;
 				dev->lsr |= UART_LSR_DR;
 			}
 			break;
 		}
 
 		if (dev->txcnt < FIFO_LEN) {
-			dev->txbuf[dev->txcnt++] = *addr;
+			dev->txbuf[dev->txcnt++] = data;
 			dev->lsr &= ~UART_LSR_TEMT;
 			if (dev->txcnt == FIFO_LEN / 2)
 				dev->lsr &= ~UART_LSR_THRE;
@@ -283,18 +278,18 @@ static bool serial8250_out(struct ioport *ioport, struct kvm_cpu *vcpu, u16 port
 		break;
 	case UART_IER:
 		if (!(dev->lcr & UART_LCR_DLAB))
-			dev->ier = ioport__read8(data) & 0x0f;
+			dev->ier = data & 0x0f;
 		else
-			dev->dlm = ioport__read8(data);
+			dev->dlm = data;
 		break;
 	case UART_FCR:
-		dev->fcr = ioport__read8(data);
+		dev->fcr = data;
 		break;
 	case UART_LCR:
-		dev->lcr = ioport__read8(data);
+		dev->lcr = data;
 		break;
 	case UART_MCR:
-		dev->mcr = ioport__read8(data);
+		dev->mcr = data;
 		break;
 	case UART_LSR:
 		/* Factory test */
@@ -303,7 +298,7 @@ static bool serial8250_out(struct ioport *ioport, struct kvm_cpu *vcpu, u16 port
 		/* Not used */
 		break;
 	case UART_SCR:
-		dev->scr = ioport__read8(data);
+		dev->scr = data;
 		break;
 	default:
 		ret = false;
@@ -336,46 +331,43 @@ static void serial8250_rx(struct serial8250_device *dev, void *data)
 	}
 }
 
-static bool serial8250_in(struct ioport *ioport, struct kvm_cpu *vcpu, u16 port, void *data, int size)
+static bool serial8250_in(struct serial8250_device *dev, struct kvm_cpu *vcpu,
+			  u16 offset, u8 *data)
 {
-	struct serial8250_device *dev = ioport->priv;
-	u16 offset;
 	bool ret = true;
 
 	mutex_lock(&dev->mutex);
 
-	offset = port - dev->iobase;
-
 	switch (offset) {
 	case UART_RX:
 		if (dev->lcr & UART_LCR_DLAB)
-			ioport__write8(data, dev->dll);
+			*data = dev->dll;
 		else
 			serial8250_rx(dev, data);
 		break;
 	case UART_IER:
 		if (dev->lcr & UART_LCR_DLAB)
-			ioport__write8(data, dev->dlm);
+			*data = dev->dlm;
 		else
-			ioport__write8(data, dev->ier);
+			*data = dev->ier;
 		break;
 	case UART_IIR:
-		ioport__write8(data, dev->iir | UART_IIR_TYPE_BITS);
+		*data = dev->iir | UART_IIR_TYPE_BITS;
 		break;
 	case UART_LCR:
-		ioport__write8(data, dev->lcr);
+		*data = dev->lcr;
 		break;
 	case UART_MCR:
-		ioport__write8(data, dev->mcr);
+		*data = dev->mcr;
 		break;
 	case UART_LSR:
-		ioport__write8(data, dev->lsr);
+		*data = dev->lsr;
 		break;
 	case UART_MSR:
-		ioport__write8(data, dev->msr);
+		*data = dev->msr;
 		break;
 	case UART_SCR:
-		ioport__write8(data, dev->scr);
+		*data = dev->scr;
 		break;
 	default:
 		ret = false;
@@ -389,6 +381,47 @@ static bool serial8250_in(struct ioport *ioport, struct kvm_cpu *vcpu, u16 port,
 	return ret;
 }
 
+static void serial8250_mmio(struct kvm_cpu *vcpu, u64 addr, u8 *data, u32 len,
+			    u8 is_write, void *ptr)
+{
+	struct serial8250_device *dev = ptr;
+	u8 value = 0;
+
+	if (is_write) {
+		 value = *data;
+
+		serial8250_out(dev, vcpu, addr - dev->iobase, value);
+	} else {
+		if (serial8250_in(dev, vcpu, addr - dev->iobase, &value))
+			*data = value;
+	}
+}
+
+static bool serial8250_ioport_out(struct ioport *ioport, struct kvm_cpu *vcpu,
+				  u16 port, void *data, int size)
+{
+	struct serial8250_device *dev = ioport->priv;
+	u8 value = ioport__read8(data);
+
+	serial8250_mmio(vcpu, port, &value, 1, true, dev);
+
+	return true;
+}
+
+static bool serial8250_ioport_in(struct ioport *ioport, struct kvm_cpu *vcpu,
+				 u16 port, void *data, int size)
+{
+	struct serial8250_device *dev = ioport->priv;
+	u8 value = 0;
+
+
+	serial8250_mmio(vcpu, port, &value, 1, false, dev);
+
+	ioport__write8(data, value);
+
+	return true;
+}
+
 #ifdef CONFIG_HAS_LIBFDT
 
 char *fdt_stdout_path = NULL;
@@ -427,8 +460,8 @@ void serial8250_generate_fdt_node(void *fdt, struct device_header *dev_hdr,
 #endif
 
 static struct ioport_operations serial8250_ops = {
-	.io_in			= serial8250_in,
-	.io_out			= serial8250_out,
+	.io_in			= serial8250_ioport_in,
+	.io_out			= serial8250_ioport_out,
 };
 
 static int serial8250__device_init(struct kvm *kvm,
-- 
2.17.1