[PATCH v6 6/9] drm/vc4: hdmi: Store pixel frequency in the connector state

Maxime Ripard maxime at cerno.tech
Thu Dec 10 09:23:26 EST 2020


The pixel rate is for now quite simple to compute, but with more features
(30 and 36 bits output, YUV output, etc.) will depend on a bunch of
connectors properties.

Let's store the rate we have to run the pixel clock at in our custom
connector state, and compute it in atomic_check.

Acked-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 26 +++++++++++++++++++++++++-
 drivers/gpu/drm/vc4/vc4_hdmi.h |  1 +
 2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 8978df3f0ca4..682b3aca2c35 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -198,6 +198,7 @@ vc4_hdmi_connector_duplicate_state(struct drm_connector *connector)
 	if (!new_state)
 		return NULL;
 
+	new_state->pixel_rate = vc4_state->pixel_rate;
 	__drm_atomic_helper_connector_duplicate_state(connector, &new_state->base);
 
 	return &new_state->base;
@@ -615,9 +616,29 @@ static void vc4_hdmi_recenter_fifo(struct vc4_hdmi *vc4_hdmi)
 		  "VC4_HDMI_FIFO_CTL_RECENTER_DONE");
 }
 
+static struct drm_connector_state *
+vc4_hdmi_encoder_get_connector_state(struct drm_encoder *encoder,
+				     struct drm_atomic_state *state)
+{
+	struct drm_connector_state *conn_state;
+	struct drm_connector *connector;
+	unsigned int i;
+
+	for_each_new_connector_in_state(state, connector, conn_state, i) {
+		if (conn_state->best_encoder == encoder)
+			return conn_state;
+	}
+
+	return NULL;
+}
+
 static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 						struct drm_atomic_state *state)
 {
+	struct drm_connector_state *conn_state =
+		vc4_hdmi_encoder_get_connector_state(encoder, state);
+	struct vc4_hdmi_connector_state *vc4_conn_state =
+		conn_state_to_vc4_hdmi_conn_state(conn_state);
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	unsigned long pixel_rate, hsm_rate;
@@ -629,7 +650,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		return;
 	}
 
-	pixel_rate = mode->clock * 1000 * ((mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1);
+	pixel_rate = vc4_conn_state->pixel_rate;
 	ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
 	if (ret) {
 		DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
@@ -801,6 +822,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 					 struct drm_crtc_state *crtc_state,
 					 struct drm_connector_state *conn_state)
 {
+	struct vc4_hdmi_connector_state *vc4_state = conn_state_to_vc4_hdmi_conn_state(conn_state);
 	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	unsigned long long pixel_rate = mode->clock * 1000;
@@ -831,6 +853,8 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	if (pixel_rate > vc4_hdmi->variant->max_pixel_clock)
 		return -EINVAL;
 
+	vc4_state->pixel_rate = pixel_rate;
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 2cf5362052e2..bca6943de884 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -182,6 +182,7 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
 
 struct vc4_hdmi_connector_state {
 	struct drm_connector_state	base;
+	unsigned long long		pixel_rate;
 };
 
 static inline struct vc4_hdmi_connector_state *
-- 
2.28.0




More information about the linux-arm-kernel mailing list