[PATCH 12/15] drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts

[Maxime Ripard]

We introduced the BCM2711 support to the vc4 HDMI controller with 5.10,
but this was lacking any of the interrupts of the CEC controller so we
have to deal with the backward compatibility.

Do so by simply ignoring the CEC setup if the DT doesn't have the
interrupts property.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 327638d93032..69217c68d3a4 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1655,9 +1655,15 @@ static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
 {
 	struct cec_connector_info conn_info;
 	struct platform_device *pdev = vc4_hdmi->pdev;
+	struct device *dev = &pdev->dev;
 	u32 value;
 	int ret;
 
+	if (!of_find_property(dev->of_node, "interrupts", NULL)) {
+		dev_warn(dev, "'interrupts' DT property is missing, no CEC\n");
+		return 0;
+	}
+
 	vc4_hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops,
 						  vc4_hdmi, "vc4",
 						  CEC_CAP_DEFAULTS |
-- 
2.28.0